Jump to content
SAU Community

Recommended Posts

Good news, had dump and wastegate pipes fabricated yesterday.. Chucked the Haltech into Closed Loop O2 mode and went for a nice 40 minute cruise. Car sounds amazing and has not missed a beat so far. Drove it into work and will be dropping the oil tonight to fill up with some fresh Synthetic SN rated oil and will try and book some dyno time in the coming days.

Here's an underside shot :) Suprisingly the car is quiet when cruising! Almost quieter than my old 3" system.. Weird..

0KhFAgvl.jpg

Had a couple of hours on the dyno at work tonight.. Just cleaned up the fuel map mostly and made sure the thing wasnt going to destroy itself.. My very amateur ability resulted in this:

zThpBLSl.jpg

Cant wait to get some more dyno time and see what happens when i put some boost into it. :D

  • Like 1
  • 1 month later...

Got some dyno time this afternoon, dialled in some boost through the mid-range.. same outright power but plenty of punch from 3000 onwards! Peak boost here is 20psi, i havnt had a good dig through the logs to see how smooth the curve is but theres still some work to be done in my fuel mapping as the AFR's are a bit rich and slightly wonky..

TNkspLcl.jpg

That 200-250rwkw at 3-4k is a lovely thing. :)

Had an awesome evening and it was great chatting to guys in the staging lanes while waiting to run.

First run i took it easy off the line and shifted into 5th early.. 12.89@97mph

Second I stayed into it a bit but ran out of legs in 4th and did a 11.91@124mph

The next few runs were all high 11's at ~122mph

Had a break and got some food then went back out for a couple more sessions..

Managed an 11.54@125mph then an 11.59@125mph

Definitely keen to get back out there with some proper rubber :)

LUXGHHZl.jpg

  • Like 1
  • 3 months later...

I completely forgot to update this thread after posting graphs in other sections of SAU.

Soo, this was the result after a night on the dyno and 26psi. Still pretty safe at this point.

Gonna get back to the drags on some ET Streets and then Cootamundra in May and attempt to play with the big boys.

gAl4ZNEl.jpg

  • Like 1
  • 1 month later...
  • 2 weeks later...

Man this is so ridiculously insane for a rwd, but I love the attention to detail. I also love "lack of funds" but you go straight for an rb34 build hahaha. Great work on this, it's nice to see a GTT get some loving.

Had some more dyno time last night after some much needed upgrades.. Fitted the car with a new gearbox with OS internals, OS diff and new clutch. Also re-did the breather setup in the engine bay and fitted the car with a real-time GPS tracking system I designed.. ;)

OJY3pMDl.jpg

cfhKR07l.jpg

LGABnvdl.jpg

Now with 29psi and being slightly more aggressive with mixtures and timing i've passed the 800rwhp barrier with 824rwhp at ~7300rpm.

2X64LCCl.jpg

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Before I commit to it as I already have the wastegate off the car, would you change it to the 9psi spring instead of the 12, or whack it back on now and try your suggestion?
    • Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
    • Car has been sold and I am now selling leftover parts. Prices are non-negotiable as I will sell to my mechanic if it won't sell here. Prices are firm except for the Random Parts listed at the very bottom. All parts are genuine except for the S-Tune front bumper. Volk Racing TE37SL 19×10.5″ +12 5×114.3 pressed graphite with P-Zero 275 30 19 tyres [USED] $4,500 Wheels are in perfect condition, have been sitting in my garage for the past 6 years. Tyres still have 90% tread, but since they're now old, I would not recommend you drive hard on them. K-Sport Super Sport External Reservoir Coilovers (made to order) [NEW] $2,500 Front spring rate 14kg, Rear spring rate 7.5kg Fork Type. You can read all about it here (https://www.k-sportracing.com/product_detail.php?Key=12). I was going to start tracking the GTR, but never got around to it. Paid $3500 (after USD conversion and taxes). HKS Kansai Service Tower Bar [NEW] $500 Never fitted in the original Japanese box. R34 GTR S-Tune Fibreglass Bumper [NEW] $500 No mesh - No Box - No damage - just dusty. Nitto RB26 Clear Timing Cover [NEW] $50 Couldn't fit RB2630 due to bonnet clearance. HKS Piping Kit Special Type (BNR34) & Apexi Power Intake Air Filter Kit & Password JDM Adapter [USED] $1,000 Missing some rubber hoses and supports, but you get what you see. Nismo NE-1 Weldina Turbo Back Exhaust & Custom 3.5"straight pipe [USED] $1,000 Needs some love, but perfect for those who want to go back to OEM+. Bayside Blue Aluminium Vspec Bonnet/Hood [USED] $700 Came off my GTR. Unfortunately, the tips have been slightly ground down. It will need some repairing. Bride Low Max Super Seat Rails [USED] $350 The price is for both sides. Will post pictures when I get a chance. Random Parts [USED] - negotiable Standard rb26 cams (intake and exhaust) $10 Stock amber front indicators $10 Standard GTR bumper lower side grills $10 Stock amber side indicators $10 Nismo Sports Resetting ECU $50 Water reservoir $10 Stock airbox mouth $10 Stock fuel rail $10 Stock coilovers from R34 GTR Vspec $100 PM me which items you are interested in. I do work 9-5, so I will be responding daily at best. Best time for pick up is after 5 and before 7 on weekdays, or i can work something out on weekends. I will only accept cash or PayID. Pick up only - located Epping NSW area.
×
×
  • Create New...