Jump to content
SAU Community

Recommended Posts

Call has been made, advise has been given.

Hope all is well... :yes:

I don't think my battery will fit as it has skinny little poles.

If Richards has thicker poles then it might fit?

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ there is NO JOKES in this !!! LOL

If you get it Jeremy, we can fit it!!!

Ok so checked the alternater belt its nice n tight. Gauge says the car is sitting on 12v when i turn the ignition but dont start it. and itjumps up and down randomly between about 11.8 to about 15 when i was driving it home without using indicator.or turning on my head lights. I might bring it by the shop tomorrow (if its starts) if thats ok Bren?

I'm gonna take a punt and say it's the Battery dropping a cell.

Sounds to me like the alernator is trying to charge it but when you put the indicators on, the volts dip cause there's little support from the Battery...

But I'm an eternal Noob at these things. :/

Fitting some new tyres on the front of Oldm8 Helga so I can drive to Sydney and slap 12months on her. Gives me some time to save some cash-o to fix the Chassis !

Helga 2.0 coming to a suburb near you soon !

No worries ill come over in my lunch break. Thank you!!!

See you then

Smoooooooooooooooooooooth :P

Fitting some new tyres on the front of Oldm8 Helga so I can drive to Sydney and slap 12months on her. Gives me some time to save some cash-o to fix the Chassis !

Helga 2.0 coming to a suburb near you soon !

Why do you need to go to Sydney to put rego on her? o.O

Smoooooooooooooooooooooth :P

Why do you need to go to Sydney to put rego on her? o.O

Becuase Helga is rego'd in NSW :( and given my chassis damage trying to get it into ACT is going to be a pain. My cuz knows a guy who doesn't even hoist the cars up when he inspects the cars, so I might be in luck given everythign else on the car is sweet !

Only problem is, I cannot insure it, Just Car knocked me back becuase of the chassis damage :( !

Becuase Helga is rego'd in NSW :( and given my chassis damage trying to get it into ACT is going to be a pain. My cuz knows a guy who doesn't even hoist the cars up when he inspects the cars, so I might be in luck given everythign else on the car is sweet !

Only problem is, I cannot insure it, Just Car knocked me back becuase of the chassis damage :( !

QBN and lots of places in ACT can do NSW rego inspections man, see if you can find someone local to look it over!

is that cos you told them of the existing damage?

This. lol you shouldn't have told them. Should insure the car comprehensively, then slide it up a gutter. Car is written off, chassis damage is a result of the accident, win win.

I tried to get some of the ACT shops to do a rego but they wouldn't touch it until it went over Dickson :P My cousin knows of a guy in Sydney who is very laxed about passing cars. The loudness and lowness doesn't even phase this bloke. Quick dolla aye?

Lying was an option, but I decided not too. Oh well, these things seem to work themselves out if you put in the time and effort. I guess you get an ease of mind if you ever buy anything off me, I wouldn't lie :P

I tried to get some of the ACT shops to do a rego but they wouldn't touch it until it went over Dickson :P My cousin knows of a guy in Sydney who is very laxed about passing cars. The loudness and lowness doesn't even phase this bloke. Quick dolla aye?

Lying was an option, but I decided not too. Oh well, these things seem to work themselves out if you put in the time and effort. I guess you get an ease of mind if you ever buy anything off me, I wouldn't lie :P

It isn't lying, it's just omitting certain facts lol.

You only need to take it over Dickson if you're going for ACT rego - not NSW. The places you took it were either deadset retarded, or didn't realise you were after NSW pink/blue slip stuff.

The deal with Dickson is people are too shit scared to do a inspection on these type of cars and tell them to go to Dickson.. But you only need to go to Dickson is if it less that 10yrs old. I got my cars changed from nsw to act through a normal inspection place.

But yes leaving out some info is better than screwing yourself to the wall by telling the truth.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...