Jump to content
SAU Community

Recommended Posts

Put the Tarzan G sensor in this evening :) . 15mins work so is easy as.

Too dark to go try it out now :( , so will give it a burl tomorrow morn. :D

While I was putting it in I noticed some Gear Box oil on the base of my C's short shifter and over the rubber boot.

Called ESP for advice. Cleaned it off and will keep an eye on it.

Might need to have a kit through it (shift bushing/plastic ring and the thin insulation seal).

As per above. I Tested the Tarzan G Sensor out this morning. (Seat of the pants testing)

A definite improvement and worth while :yes: even for the normal to spirited driving that I do :yes:. If your doing track work then I believe the benefits would be even greater.

(I suppose so would a cheap Torque controller set to 7 on the dial)

Cabin torque dial actually moving under normal acceleration off the lights :) and up through the gears. You feel it and you see it - Win!

It's progressive and reflects what your doing - depressing accelerator and it's shifting power to the front.

- rather than heavy acceleration and 4WD coming on late (unsettling car). I used to do this just to see if the Attessa is working.

Tested it out on a corner I take every day turning right on the roundabout and then halfway round a quick left to get off it.

Normally I fight the car on the left turn from spearing off to the right. Not today :D went exactly where I pointed her.

GTR feels more sure footed off the mark and around corners, especially accelerating out the other side. There is no just on or off it's more progressive / linear.

It's definitely more responsive making it feel like it has more power/grunt under acceleration from the getgo. Attessa (4wd) is definitely on ALOT quicker.

As everyone knows I am impatient and waiting, even a second or two longer, gives me the shits. (hence -7's)

Slight improvement under braking (ABS). I can feel it but nothing to write a rant about.

Sorry if my rant sounds like an advertisement. Experiences may be different but for me a big improvement.

Before I am asked - YES my OEM G Sensor works perfectly as it was designed too - This G works ALOT better.

Very satisfying that it works properly. :thumbsup: correct install.

Some oil on your shifter? hahahahaha! im turning into a black man from getting stuck into mine.

to you a bugsplat is like a bunny through the engine fan for me.

Totally different class of car, i cant believe they come from the same factory hahaha!

Drove to Sydney, got Helga a pink slip, RTA wouldn't accept my transfer due to not living in the NSW :/ lucky dad moved there this year. Maybe next weekend I will travel back there and sort it out. Hopefully i can slap 6months on it.

a fair n quick trip early in the morn.

I'll be heading up tomoz to pick something up.

Lucky I'll only be up there for an hour. (hate the place :verymad: - not the people :wub: )

well not ALL of them :whistling:

Wish I knew you were heading up. You could of saved me the trip :rant:

Last night went round to Robs to pick up a sedan pair of foggies I purchased as I prefer these over the normal coupe ones. While I was there we also slapped on a sedan grill just for shits and giggles to see how it looked over my m spec grill. And I think I actually prefer the sedan stuff... Maybe I should have just bought a sedan.. :/

Anyway, foggies installed this morning. Think it looks much nicer this way :D

post-109116-0-44372600-1366431895_thumb.jpg

Chris that looks awesome! nice one.

Grill looks fat too especially the dark grey vs the silver. :)

Picked up a series 2 33 wing I stole on Ebay from Kambah, then drove the Uriarra to Cotter to Point Hut twisties. :D

So much fun and fuel.

I vote we do a drive/cruise on the Uriarra road. Heaps more drive than the last Cotter run..

:woot:

Mad! Yeah I like the contrast from the silver to the black. Am wondering what black foggy grills would look like.

I went out past Point Hut and Tidbinbilla for those photos today haha. Was good fun apart from the road work they are doing there...

Yeah Uriarra road is a longer one :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...