Jump to content
SAU Community

Recommended Posts

Yes. custom with a mid and rear oval muffler (should add free flowing 350+kwa)

Also have a 5Zigen axle back oval muffler

Edit: both can be classed as almost new.

Edited by Sinista32

If the weather is good tomorrow ill be throwing in my new thermostat, compression test, replace my atmo bov with a plumb back, replace my intercooler and piping with a blitz turn flow kit and put on the cold air box. When my car finally gets back on the road it will feel like a new car. Also have a set of jic magic coilovers on the way. Will be wo much better than Gabs in the front and bc's in the rear.

Yes, Cooma Run = FUN! Thanks Mik!

Got my Magnaflow Muffler on, Love the look and the quietness.

Surpirisingly it took away all exhaust drone even though it's as straight thru as the Canon.

attachicon.gifTwin Tip on.jpg attachicon.gifDSC01548.JPG

All flanged up so I can chuck the canon on anytime. ;)

Needs Less HICAS :yes:

Needs Less HICAS :yes:

Doesn't give me problems and if it does, I have a spare. :D

If the weather is good tomorrow...

Wow that's a list! Compression test will be interesting.

had a coffee with mine - that is all :/

handed over spare exhaust system (for $$)

sorted and boxed spare parts, threw some more stuff out

oh I did have a go at installing some bonnet struts on the 32, very easy, but still needs minor modification to fit - thanks to grinder MiK who's on the job.

boomerang trolley jack came back

had a coffee with mine - that is all :/

handed over spare exhaust system (for $$)

sorted and boxed spare parts, threw some more stuff out

oh I did have a go at installing some bonnet struts on the 32, very easy, but still needs minor modification to fit - thanks to grinder MiK who's on the job.

boomerang trolley jack came back

Don't throw any 32 parts out :ph34r: Never know what someone might need...

I pulled the Space saver out of the GTR and started to design a custom toolbox that will fit in it's place.

Also cleaned the interior properly for the first time in months. Steam cleaned the car mats and the seats. Car smells like new again!

Ran out of my favourite detailing product. Must get more. Hopefully the weekend has some nice weather so i can jack the car up and clean underbelly.

Also noticed my brake discs are starting to Lip. Good chance as any to upgrade....

Am also getting full braided hoses made up for the entire engine bay (Radiator, vacuum lines, catch can, Fuel pressure reg, etc....)

This weekend provided weather is good: Painting a HEAP of a parts. Pulled off windscreen wipers, washer bottle, door trim, and still more to come off.

All in all getting there. :yes:

Threw the f**k-r in the bin after chasing an intermittent missfire problem.

New OEM coils installed... no dice and expensive. Now have 6 perfectly good Yellow jackets sitting around.

New sparkies installed... no dice.

Took it to ESP for them to have a look. no dice so far.

You have to be kidding me....

Next step... Loom?

I'd just wait for ESP to find it. If they can't figure out what the issue is i would be questioning taking it there in the first place. Possibly AFM, or you might just need a re tune. Who knows. The joys of owning performance cars :yes:

Frustrating. ^^ No AFM, is Mafless with ViPEC. Recently re tuned, so I doubt it would fall out of tune.

Yes, this will be the last car I will modify for a while. I keep ruining them.

R32 GTR - Ruined. more time in shop than on road

VN Supercharged. Runied - sounded like the world was coming to an end. Had to drive around with blower off.

VE SS. Ruined. Biggest cam in the world x Shuddering POS clutch, coilovers and more drones than the empire.

Why do I keep doing this?

End Rant.

Frustrating. ^^ No AFM, is Mafless with ViPEC. Recently re tuned, so I doubt it would fall out of tune.

Yes, this will be the last car I will modify for a while. I keep ruining them.

R32 GTR - Ruined. more time in shop than on road

VN Supercharged. Runied - sounded like the world was coming to an end. Had to drive around with blower off.

VE SS. Ruined. Biggest cam in the world x Shuddering POS clutch, coilovers and more drones than the empire.

Why do I keep doing this?

End Rant.

Could just be shitty fuel. How new are injectors?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...