Jump to content
SAU Community

Recommended Posts

Quick shift -

Shifting that is lightning fast, but also secure. By changing the structure and materials of the installation point, and by a change in the fulcrum position (lever ratio), a dramatically more solid feeling shift change was achieved, with a 25% shorter stroke and much faster shifting.

Short shift -

The Nismo Solid Shifter has been developed to provide a 7.5mm lower shift knob height and increase the hardness of the rubber shift lever. This provides 10% shorter shift distance and less deflection for a more solid confident shift.
  • Like 1

The one i got apparently doesn't. The angle of the shifter is the exactly the same when i compared them. It it just slightly shorter and is solid.
I did lots of reading up on the nismo one to make sure it wouldn't be detrimental to the synchronicity of my gearboxes internal components.
It was the reason I got it over one of the aftermarket short shifter kits. It also came with a new shifter bushing already on it which i liked because i hate changing those things.

To do list:

Put dash in

Paint shiz

Clean shiz

Tidy engine bay (wire tuck, and possibly some paint.)

Install all new braided hoses...

New to buy list:

Nismo rear view cover (new) $220

Nismo leather seat cover set (new) $1500

OEM gearstick/Handbrake boots (new) $100 ish

Possibly Nismo Strut brace....(still contemplating a mines strut brace $1500)

Nismo floor mats (new) $230

4 more bee*R stickers for my wheels $20

and still going...

=$3570.... Start saving. Sigh

  • Like 1

To do list:

Put dash in

Paint shiz

Clean shiz

Tidy engine bay (wire tuck, and possibly some paint.)

Install all new braided hoses...

New to buy list:

Nismo rear view cover (new) $220

Nismo leather seat cover set (new) $1500

OEM gearstick/Handbrake boots (new) $100 ish

Possibly Nismo Strut brace....(still contemplating a mines strut brace $1500)

Nismo floor mats (new) $230

4 more bee*R stickers for my wheels $20

and still going...

=$3570.... Start saving. Sigh

How you can justify 1500 on seat covers I'll never know haha :unsure:

How you can justify 1500 on seat covers I'll never know haha :unsure:

http://www.nengun.com/nismo/skyline-gtr-r32-seat-covers

they are oh so much more!

Honeslty i don't care about cost on the GTR. I want to get it to the best it can be. So i chip away bit by bit. After all it's only money.

Also that isn't including the bran new interior bits i plan to buy at like $140-$200 each. Center console surround has screw holes in it from previous owner mounting a gauge there. $170 for new one without the holes. =\

Yep. Nengun have slower sending times and more in freight. But a good site none the less.

I don't know why Justjap make it so difficult.

Also check:

RhdJapan.com for new OEM products.

  • Like 1

I just bought new lmgt4 centre caps and replacement nismo stickers for them from RHD japan.
Awesome site to navigate. Way too much stuff I want on there though.

Also got new hoses for all my IC pipes, fitted up the turn flow, ready to start it tomorrow and move it into my old mans garage when he goes away for the weekend on a club run so i'll change my turbo.

post-88452-0-58301700-1384411945_thumb.jpg

Edited by azathoth

http://www.nengun.com/nismo/skyline-gtr-r32-seat-covers

they are oh so much more!

Honeslty i don't care about cost on the GTR. I want to get it to the best it can be. So i chip away bit by bit. After all it's only money.

haaaawt.

so much want.

So, I got the bad news today that my ViPec needs to be sent to WA to be repaired and could take 4 plus weeks.

This puts me in a sticky situation as I need a car for work... and tmw.

Sooo, I jumped on the interwebs and sourced a shittah to run around in. Took about 2.5mins to

find this beauty... a 1996 Beep Beep Barina in Goulburn for..... $600 with 5 weeks rego.

IMG_1719_zps8993e23b.jpg

Was totaly winning and drove home (the guy who owned it works in Canberra so gave me a lift from QBN to Goulburn)

Until..... I hit a goddam Kangaroo.

Oh the humanity.. Beep Beep Booooop.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...