Jump to content
SAU Community

Recommended Posts

Yh the top half is good but the bottom half is kaput, has a cracked piece.

Hmmm... Wouldn't mind the top piece and maybe the throttle body too, I wanna get a larger throttle body (KA24) and bore out the inlet where it bolts on for more airflow.

Praps I can get it from you soon. (When I reclaim my O2 socket) ;)

Anyone know where I can get an aluminium 3/8" NPT bung and a plug for it?

Going speed density soon on the evo and wanna get one welded into the cooler piping for the IAT sensor.

Also need a plug to block up one of the post cat o2 sensors I'm not using in the new exhaust.

Any suggestions on where to pick up either of these items would be greatly appreciated!

f**ked around with my idle speed, cranked it down so the timing belt doesn't f**k me off, sould have it booked into Trojan next week :)

and I got the GTR bov on, haven't been out to see how it sounds yet :( that was hard! the guy before me had a bigger bov on so he clamped the bigger hose down heaps, so it was all deformed, after a lot of heating and swearing I finally got it on :D

me : 1 - bov : 0

Edited by ..::R33GTS-T::..

Anyone know where I can get an aluminium 3/8" NPT bung and a plug for it? <br />Going speed density soon on the evo and wanna get one welded into the cooler piping for the IAT sensor.<br />Also need a plug to block up one of the post cat o2 sensors I'm not using in the new exhaust.<br />Any suggestions on where to pick up either of these items would be greatly appreciated!

<br /><br />Pirtek in Fushwick or Industrial Supplies in Fushwick opposite shell. To get it welded I would do it for you just have to find time to sneak into my uni workshops otherwise if your in a rush Natrad (Phillip) can tig weld.

Engine bay is actually FILTHY!!! It had spider webs near the oil filter.

Needs a good clean but so does the whole car...Meh. I'll get there. :P

Made some enquiries regarding Exhaust, Wheel alignment and Rego Inspection today...

Still a work in progress.

Engine bay is actually FILTHY!!! It had spider webs near the oil filter.

Needs a good clean but so does the whole car...Meh. I'll get there. :P

Made some enquiries regarding Exhaust, Wheel alignment and Rego Inspection today...

Still a work in progress.

you could almost say your engine bay is cleaner then mine :( looking at those photos made me go out and clean my engine bay! haha its defiantly coming along nicely :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...