Jump to content
SAU Community

Recommended Posts

I Grabbed some from OTR for my Nismo LMGT's. Could have bought Nismo nuts but decided to get some alot stronger for less than half the price.

Dont under estimate the value of a good set of nuts. I prefer steal (lol). Give them a call and you'd be surprised about the price :).

Unless your after 1/100th of a second I'd buy something that may be lifesaving over wheight saving.

You also couldn't go past Rays. They make great rims so you can expect their wheel nuts to be great too.

I Grabbed some from OTR for my Nismo LMGT's. Could have bought Nismo nuts but decided to get some alot stronger for less than half the price.

Dont under estimate the value of a good set of nuts. I prefer steal (lol). Give them a call and you'd be surprised about the price :).

Unless your after 1/100th of a second I'd buy something that may be lifesaving over wheight saving.

You also couldn't go past Rays. They make great rims so you can expect their wheel nuts to be great too.

i have nismo wheel nuts.

i have thrown alot at them, and never a problem.

so long as they are torqued correctly when put on.

also, on your rays front, nismo also make quality items, so their wheel nuts should be of no exception, which, they are not.

ot, bought an engine and machined flywheel for the hilux this arvo.

$2 for both.

gotta love ebay.

motor has stripped dizzy drive gear on cam, not worried, as it will be replaced.

Anthony, thanks for the offer to help pull my dash out. I Got lazy and didn't want to spend several hours on it learning as I go.

So I got Audiotech on the job today mate. After things like glove box, centre stereo and consoles removed, apron under the steering wheel

Turns out that 2 small screws and 2 bolts/nuts hold the dash itself on. Amazed !

Upshot - my existing dash will be available by the weekend. If you want it come get it Friday/Saturday (and pay later :))

I already got a dash off you bro! haha. well im glad the new one is in. Let us know if you ever need a hand. Out of curiosity how much is it costing for them to do it? i have yet to decide on if i will bother to do it or pay someone. Though my job runs out in 3 weeks and im still trying to find a new one... how fun. Richard i still owe you $150 from the other dash. When i get a new job ill come round with what i owe you. I also can't find that fking boost controller.... I think i have gremlins stealing from me.

Note to self: new pod filters, Cams, Haltech or z32's (yet to decide) and i said my GTR was finished in the engine...

I could never have been so wrong...

Shite - thats right. Hmmm

Anyone after an R32 dash. Suits all 32's

Has a minor bubble' and a plug to cover a 5cm hole. All in all it looks good........just not perfecto

I have all of the Blitz Dual SBC stuff except for that display/control :( (this is good stuff).

Haltech does all the shite now :D

Looks tasty. :thumbsup: Did you pull them off to do it or just leave them on and mask everything?

Wanna do this too, Black with Red NISSAN. :D

I left them on and masked everything. I didn't want to bleed the brakes.so took a shortcut. It will look better if you took it off and the clips I'm yet to sand paper the Nissan out and paint it silver or white.

I already got a dash off you bro! haha. well im glad the new one is in. Let us know if you ever need a hand. Out of curiosity how much is it costing for them to do it? i have yet to decide on if i will bother to do it or pay someone. Though my job runs out in 3 weeks and im still trying to find a new one... how fun. Richard i still owe you $150 from the other dash. When i get a new job ill come round with what i owe you. I also can't find that fking boost controller.... I think i have gremlins stealing from me.

Note to self: new pod filters, Cams, Haltech or z32's (yet to decide) and i said my GTR was finished in the engine...

I could never have been so wrong...

buy haltech.

i have pods for sale.

m's elbows with unknown filters.

sitting in the garage not doing much.

I have some Apexi pods for sale too if that helps you at all Anfanee :)

This one:

http://www.nengun.com/apexi/power-intake-gtr

Came off mine when I went to single turbo. You can have for $100.

I have some Apexi pods for sale too if that helps you at all Anfanee :)

This one:

http://www.nengun.com/apexi/power-intake-gtr

Came off mine when I went to single turbo. You can have for $100.

That would be great, Want to bring them with you on Sunday and ill grab them off you? ill scrape $100 from the missus =P

Finished and installed my DIY Pod Shield. (just needs some rubber round the edges.)

Amazing what you can do with a coat hanger, texta, cardboard, perspex, a renovator tool and a heat gun. :laugh:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...