Jump to content
SAU Community

Recommended Posts

So for the last few months i've been filling up at around 300km. I have an Injen CAI and no other engine mods.

I just filled up then and my needle was just above empty (i do realise that the needle is a little incorrect)

I filled up the tank today at 287KM and my car took 41L of fuel, i know the tank holds 80L but i have never driven the car to completely empty, in fact i don't think i've even done over 400km to the tank.. I feel so stupid because i've been filling up way before necessary, with the driving i do i should theoretically be getting close to 500KM to a tank.

Facepalm.

Link to comment
https://www.sau.com.au/forums/topic/416439-whats-your-average-km-to-a-tank/
Share on other sites

I usually get around 600km before filling which is usually just after the fuel light comes on. I usually manage 11.5L/100km in winter. And about 12.0L/100km in summer (heavy AC use in summer). Which gives me a theoretical range of 660-700km per tank.

All light city driving.

6MT sedan. With shell 95RON fuel.

Edited by sonicii

I usually fill at 1/4 left by which point there's 400km on the clock. Was avg 12l/100km. No ac, start stop traffic though. Stock as a rock.

After changing the diff fluid, this seems to be getting better. Now looks like closer to 10l/100km but we've been doing a lot of motorway Kim's during this season.

Mines stock and I got 730km driving from Sydney. Around town I get around 550 ish

That's impressive!

aha I don't even trust the needle anymore, i just watch how many km's i've done and where i've been driving/how i've been driving then fill up when i deem approprite. But this time i've going to let it run to 500 then refill and see how close to empty i am then.

I have only done 1 highway trip in mine. Townsville - Yeppoon and return.

1 tank each way, about 740km. Low fuel light had just come on when I arrived in Yeppoon. After filling in Yeppoon, i still had 1/4 of a tank left when arriving in Townsville.

From memory, I averaged about 7.8L/100km overall.

After reflashing with the Uprev software, my first full fill up on 98 till now was 790kms. Not even kidding. Will be interesting to see if this can happen again... :S

Did you drive to Sydney?

Cruise control 95kmh behind a road train?

James sometimes an automatic with cruise control can actually be worse on fuel than a manual because of the constant gear changes. At least i know for a fact this is the case for the mid 2000 model Prado's.

After reflashing with the Uprev software, my first full fill up on 98 till now was 790kms. Not even kidding. Will be interesting to see if this can happen again... :S

Did you drive to Sydney?

Good question.. under want conditions did you get 790km from 1 tank? if it was highway KM, then this is about normal.. if it was city driving then it is very impressive.

Good question.. under want conditions did you get 790km from 1 tank? if it was highway KM, then this is about normal.. if it was city driving then it is very impressive.

I'm guessing that must be highway km unless he's driving a little 1.5L v4. Max i've gotten out of mine for highway km is about 700 and that's with a little bit of enthusiastic driving.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...