Jump to content
SAU Community

Recommended Posts

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

Impressive detective work. :)

The story makes more sense now.

The $13,500 "paint job" would be as a result of the body damage on the drivers side and rust on the passenger side (and probably elsewhere).

The engine was cactus so a rebuild would have been in order. Add all the other bits and pieces and it's doubtful the owner would be making money despite the $10,000 initial cost.

The GTR money pit strikes again...

However, it is one of the more collectible models - so the $10k outlay plus the cost of restoring the body and engine get it close enought to it's value in nice condition, and it stands to hold value, or maybe increase (Japanese prices are holding or rising). At the end of the day... what a great project for someone who wants a project, and one of the 'historic' original Nismo cars has been restored rather than trashed and wrecked.

I say well done Sir.

Hey Shaun, when you pulled the boot lip spoiler and hood lip off, did you replace them with genuine new items for respraying if the old ones were knackered? It looks like the boot lip spoiler has been replaced because the original was rusted out (I can see that it's as lumpy as hell in the boostclassifieds photos). I'd hazard at a guess that the front hood lip was rusted out as well, but then again it looks ok in the boostclassifieds ad. I know that new ones are available via Amayama, but they aren't cheap.

I'm just curious to be honest. Obviously use of OEM items would be the 'most proper' way to go, but then again, they would be liable to rust like the originals. Some people just advocate replacing them with plastic reproductions that you stick on, rather than screwing in like the OEM items.

just saw pictures of the car on carsales, i must say it does look like a beautiful car. quick question though, was the engine bay sprayed at the same time?

surely for $13.500 it was a full spray job.

also how many kms does it have?

does it have the genuine dash?

does it also have the auction grade, books and service history from japan?

if so i think you should get between 30-35000, might take anywhere between 6-12 months but someone might pop up.

in my opinion though only if the engine bay is as clean as the body, it has books with service history, its under 80,000kms and a high grade import with auction papers from japan you should get it, but if not id say under 30k

either way, you have a beautiful car mate, and nothing wrong with having her in the garage for the next 10 years waiting for the price your after, only problem with that is you have a 2 door sunday driver that you wouldnt want to put too many kms on due to resale value.

and if you want that ve gts or prado, you can either afford to have one with a $30.000 car in the garage, or a cheaper car to drive around in and a $30.000 weekend cruiser.

guess they are your otions

either way, congrats on the nice car

Hi mate cheers, i decided not to paint the engine bay but now regret it

It's got 87000kms

No grade papers came with it

Yea I think il keep and just see what happens down the track

Impressive detective work. :)

The story makes more sense now.

The $13,500 "paint job" would be as a result of the body damage on the drivers side and rust on the passenger side (and probably elsewhere).

The engine was cactus so a rebuild would have been in order. Add all the other bits and pieces and it's doubtful the owner would be making money despite the $10,000 initial cost.

The GTR money pit strikes again...

Yep it turned out it was only the head but went the hole jog with the rebuild,

Same with the paint could of done a patch and paint but being a nismo I wanted to get it back to its former glory

Hey Shaun, when you pulled the boot lip spoiler and hood lip off, did you replace them with genuine new items for respraying if the old ones were knackered? It looks like the boot lip spoiler has been replaced because the original was rusted out (I can see that it's as lumpy as hell in the boostclassifieds photos). I'd hazard at a guess that the front hood lip was rusted out as well, but then again it looks ok in the boostclassifieds ad. I know that new ones are available via Amayama, but they aren't cheap.

I'm just curious to be honest. Obviously use of OEM items would be the 'most proper' way to go, but then again, they would be liable to rust like the originals. Some people just advocate replacing them with plastic reproductions that you stick on, rather than screwing in like the OEM items.

Mate I saved the bonnet lip, but the rear I replaced as yea they rust out that's why they look bubbled, with a carbon fibre type, I wanted to buy an original one but nissan wanted $1400 for it- just couldn't do it,

However, it is one of the more collectible models - so the $10k outlay plus the cost of restoring the body and engine get it close enought to it's value in nice condition, and it stands to hold value, or maybe increase (Japanese prices are holding or rising). At the end of the day... what a great project for someone who wants a project, and one of the 'historic' original Nismo cars has been restored rather than trashed and wrecked.

I say well done Sir.

Thanks mate in really happy with how it turned out, still trying to track down good condition steering wheel very hard to find

Sorry Alex - I got your name wrong :blush:

Just keep looking out for the wheel - if you're keeping it (and I would) then one will pop up. I'm just sitting tight waiting for a few nice replacement bits to come up for my V-Spec. Wait long enough and they will appear. For example, I've been waiting for almost 6 months for a good original Nismo front strut brace to drift by. A few weeks ago an original powdercoat black one with master cyclinder stopper bobbed up in the SA forums.... about 20 minutes drive from my place. $150. Score.

Sorry Alex - I got your name wrong :blush:

Just keep looking out for the wheel - if you're keeping it (and I would) then one will pop up. I'm just sitting tight waiting for a few nice replacement bits to come up for my V-Spec. Wait long enough and they will appear. For example, I've been waiting for almost 6 months for a good original Nismo front strut brace to drift by. A few weeks ago an original powdercoat black one with master cyclinder stopper bobbed up in the SA forums.... about 20 minutes drive from my place. $150. Score.

Nice man yea I've looked at a few but they are all rooted, I thinking of getting a old one rewrapped.

V- spec very nice buddy, so Whats ur thoughts on these increasing in the future ??

Hahahaha

Meanwhile a page or two back I was telling everyone his car is NOT worth 37k...... and now all you guys know why...

Funny how the car Ozco is selling is actually a missile he bought for 10k...

In all honesty, I would not even pay 15k for the vehicle given its had previous accident damage and also has had/still has rust....mate when you sell a car you disclose that it has had repairs done and so on rather than claiming the vehicle to be "immaculate".

I bought my V-Spec for $28k and immediately spent about $2k replacing belts, idlers, tensioners (only a 65,000km engine but 19 year old belts) - so say the car was $30k. During my 100 point inspection it was discovered that the car had previously had accident damage to the front RHS corner. The repairs had been done to such a high quality and workmanlike standard that they were only just able to be detected - and the car still presented as immaculate. The evidence of repair certainly did not affect the value of the car in my eyes and I proceeded with the purchase. I understood that it was a case of 'buyer beware' so I had the car inspected, availed myself of the facts and proceeded on that basis.

This is a very similar situation. Buyer beware. If the repairs have been completed to a very high standard then there should be no need to disclose what has previously been attended to.

On the other hand, if the engine had been replaced then I would say that that should be declared because the engine and chassis numbers would not correspond to the original records. In this instance the engine was repaired, so again, nothing to declare.

Like I said, it is a case of buyer beware - there is no legal obligation to declare previous faults, and if faults have been rectified to the highest standards then there shouldn't be any ethical issues with not declaring those items either. The seller can name their price and leave it to the prospective buyer to undertake any investigations to ascertain whether they deem the car to be of sufficient value that they proceed with the purchase.

I think that $550 for an excellent steering wheel is reasonable too. This is a limited edition collectible car and getting it to original spec will only maintain or increase it's value.

Why don't you keep the car dude? You've obviously put a bit of work into it.

I think that $550 for an excellent steering wheel is reasonable too. This is a limited edition collectible car and getting it to original spec will only maintain or increase it's value.

Why don't you keep the car dude? You've obviously put a bit of work into it.

*sorry - repeated post.... not sure what happened there*

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...