Jump to content
SAU Community

Recommended Posts

this thread makes my head hurt.

OP, you're approaching this from entirely the wrong angle.

You choose the wheels first and then the width of those wheels dictates the width of the tyre you run. The profile you run isn't a choice, it's a mathematic result that you have to follow in order to keep your VDC and speedo in check.

To say you're researching to buy wheels based on which tyre size is most readily available and well priced is a waste of time. I understand you want to buy a nice grippy tyre, but seriously, at your budget of $1000 your only option will be second hand wheels with tyres fitted, and they'll be 18's at best.

My advice, save another $1k - and then make the decision between buying something new but replica like varrstoen's or rota's and then spend 800 on tyres - or buying something jap brand, second hand with used tyres (of which you'll have no choice in anyway) and then buy better tyres when you can afford it. You'll be much happier.

Very rarely does a truly pleasing outcome result from compromise. And at $1000 budget, compromise is all you can afford. (don't mean to sound harsh, but seriously, 4 good 18" tyres are going to cost you close to $1000 as it is.)

Thanks SmokeyC34. This thread however, is not about me persay. Its a general question aimed to get some direction for newbies to the modding world.

Knowledge can't replace experience.. and that's what I'm looking for, advice from the experienced.

Don't get me wrong. Thanks for all the comments guys. Its been good.. but.. I'll like to keep it away from my situation.. (don't link the threads)

I know the budget of $1000 is a laugh, I came up with the amount for 2 reasons.. one.. I was asked many times what my budget was and two, found a couple of ebay post for 18" OEM Infinity wheels for that much or less... so I thought, lets throw this hypothetical amount into the discussion and see what comes up. Of course.. the tyres on those sets was either balding or cheapies... which I still think would be better than the cheapies on my 20"s..

I'm trying to achieve, one thing. What's the best tyre/wheel combination .. vs common size tyres for the best bang for the buck.

I'm taking the analytical approach to researching this topic! Lol! No.. I'm not an analyst!

If everyone agrees with your comment "To say you're researching to buy wheels based on which tyre size is most readily available and well priced is a waste of time" ... I'll go with your advice.

sigh. I still don't understand the point of your question - but i'll answer it anyway.

ok - stick with 18's.

buy in 8 inch widths, then you can buy 245/45/18 which is what commodores run - so plenty of tyres available domestically.

(incidentally this would net you pretty close to the exact same setup as the OEM 18s (18x7.5 18x8).)

So why don't you snag a set of OEM's - get them powdercoated black or gunmetal grey - throw some stick rubber on them and you'll have a tidy setup for under $1500.

OEM wheels pretty much cannot be beat. They're cheap, they're easy to come by, and they're strong as all hell. They fit without fouling anything, they're legal under all insurance policies, and the car was designed to work with them.

100484d1231899599-fs-oem-18-g35-coupe-wheels-flat-black-dsc00803.jpg

Edited by SMOKEYC34

sigh. I still don't understand the point of your question - but i'll answer it anyway.

ok - stick with 18's.

buy in 8 inch widths, then you can buy 245/45/18 which is what commodores run - so plenty of tyres available domestically.

I think this ^ answer was what the OP was after.

If wheel 'fashion' is not at the top of your priority list, then buying rims that run a more common tyre (hence better choice & price) is a smart thing to do. Unless you are a wheel whore, you will always buy more tyres than rims, & I've never seen a rim that adds more to handing & ride then a well chosen tyre.

Slightly off topic, but does anyone have a ballpark figure on powder-coating a set of 4 rims? and also, another strange question, do they / can they powder-coat the inside (ie where the tyre covers) as well?

No idea about powder coating cost but I painted my 18" OEMs just before Xmas - used the same silver colour as the car but darkened it a bit, 3 coats of paint & 3 coats of clear. I had the outside beads broken so it was easier to mask up, cleaned with wax & grease remover, sanded out most of the scratches & filled the bigger ones with body filler, then painted. Total cost was SFA, but we already had the paint & clear coat. You can buy wheel paint & clear in rattle cans as well. They came up fine - probably not quite as nice as powder coating but "they're just rims".

Thanks Mat. Your idea about power coating the OEMs is brilliant! I might do that! I think for short term .. I might go back to my OEM 17's for the time being.. Bucketing down in Sydney yesterday.. Went into a roundabout slowly ! Yes Slowly with family onboard and my front tyres lost grip, understeered but got it back.. but not comfortable with it. Did it 2x! Tyres tyres tyres..

powdercoat (approx $100 per rim), paint yourself (maybe $100 in materials and a weekend), or even cheaper/easier would be to plastidip the (probably need 6 cans - so $160 in materials)

If you're not up with Plastidip, it's a rubberised paint that you spray on and it sets as a bonded layer over your rims (in this case) - but they beauty is you can just peel it off if you don't like it after a while!

http://www.plastidip.net.au

So depending on your choise, that's approx $200 to bring your rims up to scratch which leaves uou $800 for tyres which will get you some pretty nice tyres in 17 inch size.

Something like these would be nice:

http://www.ebay.com.au/itm/2-X-New-235-45-17-BRIDGESTONE-POTENZA-ADRENLIN-RE002-TYRES-/290841551679?pt=AU_Car_Parts_Accessories&hash=item43b781e33f

or for something a bit more agressive, could give the nitto's a go (don't expect them to last forever though, treadwear is something like 200 - meaning they're sticky, but soft)

http://www.ebay.com.au/itm/2-X-New-235-45-17-NITTO-INVO-PERFORMANCE-TYRES-HOLDEN-FORD-NISSAN-GTR-MERCEDES-/230909264927?pt=AU_Car_Parts_Accessories&hash=item35c343c41f

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...