Jump to content
SAU Community

Recommended Posts

Was that on JEM's dyno? Man, I'd love to see what Mat's thing would run - even just mph, I would guess it'd be near 130mph

:whistling:

I'll get it there soon enough!

No Point in starting a new thread so I might as well use this one.

I ran at Calder on Friday night and the best I could manage was consistent 12.6's on shitty tyres and old tien coilovers that are as hard as a rock. MPH averaged between 108 and 112.

My car has dyno'd at 325 rwkw and it's a full weight 32 GTR.

What are peoples opinions on the low MPH?

I'm considering stick it back on the dyno and maybe checking for some boost leaks?

I would simply say the dyno is reading high to begin with and if there is a boost leak that the tuner didnt pick up on dont go back there. How much boost were they using to make 325rwkw? and what turbo's? built or stock engine?

I have a mate that has that much power and runs 11.3 at around 128mph so there is most certainly something not right with what your saying

Well the car was dyno'd around 18 months ago so anything could have happened between now n then.

The car is running 20psi on -7s with a built motor.

Either your mate has a completely stripped car or he's making more than 325rwkw in a r32 gtr to run 128mph.

complete car, no stripping of anything at all, not even the ppare wheel. The car drove to the track, ran on Bob Jane All Rounders, and drove home :)

Only internal mod is some Tomei drop in cams and cam gears. Daniel has had heaps of runs and knows how to get the thing off the line

Here it is a many years ago, pre cams, against a 32 i helped build that made 460rwkw. Skip through to about 6mins 45, its the one that does the burnout

Edited by ido09s

No Point in starting a new thread so I might as well use this one.

I ran at Calder on Friday night and the best I could manage was consistent 12.6's on shitty tyres and old tien coilovers that are as hard as a rock. MPH averaged between 108 and 112.

My car has dyno'd at 325 rwkw and it's a full weight 32 GTR.

What are peoples opinions on the low MPH?

I'm considering stick it back on the dyno and maybe checking for some boost leaks?

That does seem low mate, the MPH that is. I would have thought at least 118 to 120 and into the 11s with 325rwkw.

Is it a hub dyno or roller? Can you do a power run elsewhere to get a sense check?

  • 3 months later...

this is what my r32 gtst with a home built rb26/30det t78 turbo and a chipped ecu rb20det box two

street tyres street driven and my daily 386rwhp 14psi

did a 13.4 at 111mph with wheel spin and no lunch

Edited by r32_rb30det

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...