Jump to content
SAU Community

So Dry, Really Need More Rain.........


Recommended Posts

Thought the peak in Brisbane was supposed to be 7m lower than 2011. Unless that was some tricky number fudging and not taking into account high tide. Some places have been hit harder than in 2011 so it could be worse.

So I call shenanigans, this is possibly going to be a serious flood again, and wait for it.......be bigger than 2011, Newman is covering up!

So, hows that crazy theory coming along for you?

Do have to agree with the misreporting, or rather, misdirection of reporting. Too much focus on Brisbane where, while there is a little bit of flooding, instead of bundaberg or grafton, who are getting crazily hammered with floods bigger than ever recorded. more news time for brisbane than bundaberg.

That's Piero's pizza shop on the corner. He'd be used to humping his ovens upstairs by now.

We just got power back, has been out since Sat night.

No land line phone, no mobile coverage, no internet, pretty quiet here.

Dairy farmers have run out of cold storage so they're milking and then dumping. Poor cows are only getting 1-milking per day, udders look ready to explode.

Gen set is now first item on my shopping list.

It's shit here in bundy, we now have the army in to help. Over north side where is was the worst they found a family all dead in their house. I've been without power for 5 days and just spent 1100 big ones on a new generator that will power the whole house and ergon decided to turn our power back on all in the same day.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
×
×
  • Create New...