Jump to content
SAU Community

Recommended Posts

Eric will reveal the grand plan soon, but

even if a few of us arrive together it is likely that you'll still get split up a little, as various cars will need to let other cars going to the event in at intersections, traffic lights etc so we need to revise any expectations that we will definitely all be able to park together and just enjoy the night regardless. I'm sure no one really expects we can all stay in one group but you can only do what you can and one should be prepared for a bit of a palaver

Just fingers crossed there are no d**kheads anywhere near us or our cars.

  • Replies 249
  • Created
  • Last Reply

Top Posters In This Topic

Ok, so here is THE PLAN!

(Huge thanks to NXTIME for finding and scouting the location for us!)

A member has a contact that works in this business park. It has been verified to be pretty much empty by 5:00 pm on a Friday and has tons of room for the SAU crowd. We don't know if there will be other groups meeting there (since this is a public event) but it easily accomodates between 80 and 100 cars.

It goes without saying that anyone revving their engines, burn outs, loud music or generally bad behaviour will be asked to immediately leave and will be reported to the authorities. Being in this group you are representing SAU:NSW and our code of conduct, member or not.

Two groups probably means that the SAU entries in the mega meet will be in at least two locations, assuming they park the mega meet cars first come first serve. VIP's will be in one group and general entry in the other.

Group 1: VIP's and SAU Trade Stand Entries (we only have room for about 8 on our trade stand and they have already been identified)

Meet up at the location at 4:30 and will be departing at 5:00 pm SHARP to go the few minutes to the Mega Meet location. A small group of execs/trade stand members will depart earlier to report back on the entry conditions. This MAY require earlier departure time if queuing is bad.

SO BE PREPARED TO DEPART ANY TIME BETWEEN 4:30 AND 5:00 PM!

Group 2: General Entry should arrive to the meet location between 5:00 and 6:00 pm. Group two should depart the location at 6 PM sharp!

If the groups get split by the traffic lights there isn't a whole lot we can do as we expect the whole area to be chock full of cars trying to get to the meet. So do your best and don't try any funny business to stay together.

As long as the groups leave together we can try to reassemble in the meeting parking lot.

Expect a long queue and to be sitting on idle for a while.

TIP! Be sure to check your radiator fluid to make sure your car won't over heat.

MEETING LOCATION: Industrial Car Park off Holbeche Rd & Walters Rd, Arndell Park (Meeting will be in the Red Triangle marked on the map)

DO NOT enter from Holbeche Rd as that driveway is steep and crested. The two driveways on Walters Rd are lip/exhaust friendly, with the on on the lowest part of this picture being nearly flat.

SAU_MegaMeet_Group_Locale.jpg

MegaMeet_Route.jpg

TIP! Be sure to check your radiator fluid to make sure your car won't over heat.

^ This worries me! Hopefully I won't over heat...

Just to be safe - Full coolant flush that morning :D

If your car doesn't overheat in traffic then shouldn't be a worry. Just not a lot of us end up sitting for 1/2 hour creeping down the road so I thought it would be a good idea to put the tip out.

Also, updated info on driveways (thanks again Charlie!). The one on Holebeche Rd has a crest that doesn't like exhausts so best to enter from the Walters rd end.

Don't know what time i'll be there, I work in the area but may have to unload my truck back at liverpool, say may not be there until 9pm.

That's ok though, the "red ssv utes with real motors" parking area wont have many cars in it :P

Yeah, what happens if 2,000 people get VIP tickets.

2000 VIP spots if all taken > Pay an extra $10 at the gate for a VVIP spot hehe..

Have a great time fellahs - especially at the SAU display!

Oh, was also going to mention that there will be an award (as per website) for best club display VIP entries. So if you guys want to organise something, then please do so.

Here's a thought, how about a simple A4 sheet that you tape from the inside of the car (plan for rain) that has the club logo? Any master photoshoppers out there that can help out?

A reminder that VIP entry is via Gate 16 which is the "Spectator Entry" (ie the southern entry to Sydney Dragway) - gates open at 5:30pm;

General Admission entry is via Gate 7 which is the "Competitor Entry" (ie northern entry to Sydney Dragway) - gates open at 6:30pm.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...