Jump to content
SAU Community

Eoi: 1989 R32 Gtr (Syd)

R32DaveGTR
 Share

Recommended Posts

R32DaveGTR Enthusiast

R32DaveGTR

Posted
Posted

Hi all,

Regrettably I have to sell my car due to moving overseas (to NZ). I have owned this car for a little over 1 year now and since then have hardly had the opportunity to drive it. It was off the road for most of the time while I replaced the engine and added a few extra bits. Sadly now it must go to a new home. The paint/body work could use some t.l.c but could be a lot worse. I would love to restore it to it’s former glory but sadly can’t.

The car was imported from Japan in 2005. I am the 3rd owner since it arrived. The 1st 2 were brothers. Bought the car with 107,000 km’s on the clock and I've put a total of 3,500km. So barely been used in the last 12 months.

I am looking for any interest in buying the car as is. It is currently unregistered but was previously registered in QLD. I recently moved to Sydney and haven’t had it rego’d yet. I did have a mechanic check it over before moving down here and a few bits need fixing (some worn bushings and a gearbox mount). I have most of the bits needed to fix it and they will come with the car.

1989 R32 Nissan Skyline GTR

Roughly 110,500 km’s on the car

Roughly 75,000 km’s on the replacement engine. Came from a ’94 R32 GTR front cut. (The old engine oil pump broke and engine seized).

Twin HKS 2350 turbos

Mines 600cc fuel injectors

Mines Air Flow Meters

Genuine Mines Tuned ECU (can come with Apexi Power FC and Hand controller for $800 more)

Autobarn88 600x300x100 FMIC with hard piping kit inc. HKS front pipe

Twin Blitz BOVs

HKS throttle body gasket (also have exhaust gasket never fitted)

Bosch 040 in-tank fuel pump

Apexi style air pods

Extended Sump

Standard internals

Oil filter relocation kit with HKS oil filter.

Autobarn88 Silicon hose to replace all heater hoses and radiator hoses

Brand new fuel filter

Brand new Water, Power Steering, A/C Belts.

Brand new NPC 5 puck organic clutch and lightened flywheel to suit cost $1200, also replaced clutch release bearing at the same time as well pedal very light but awesome grip.

3” Veilside Evolution II cat back exhaust (very nice noise, not too loud. Can come with spare exhaust that was originally on the car. Straight pipe from cat to back 3.5”)

Modena Racing 17x9J Alloys with near new rubber (Tyre make and model)

Aftermarket fiberglass Side skirts, not sure what brand but they are cracked and could do with being replaced/repaired.

Tein adjustable suspension.

Brand new upgraded slotted and drilled brake discs front and back with new pads.

JIC racing front upper control arms

HKS Turbo timer

GRID HICAS electronic lock out

Greddy Boost controller

Trust boost guage

Black Widow alarm and immobilizer with remote central locking (was fitted when I purchased car)

Alpine head unit with removable face and remote control

Recaro drivers seat (was worn/torn and now patched, see pic)

Momo steering wheel.

The only thing really wrong with this car might be the paint work, it’s a bit ptchy on the spoiler and there are a couple of scratches here and there but to be expected from a 24 year old car…

I think that is about it but I may have missed something.

I also have some other spare parts that can come with the car: brand new adjustable cam gears, brand new Gates racing timing belt, Apexi Power FC with hand controller, 3.5” straight pipe exhaust (very light), “twin turbo” pipe + more…

Car is located in Sydney (2114)

Viewing welcomed/encouraged.

Looking for around $16k as is where is or I will be looking for $17.5k when I have time to get it back on the road.

Contact 0406188865 for viewing/questions.

Many Thanks.

Will get pics up this evening...

Link to comment
https://www.sau.com.au/forums/topic/419395-eoi-1989-r32-gtr-syd/
Share on other sites
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • oHBoy.
      Starter motor replacment teeth count.

      By oHBoy. · Posted

      Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • niZmO_Man
      J50 clock date suddenly reset to January 1

      By niZmO_Man · Posted

      Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • niZmO_Man
      Wheel Sizes & Offsets For Skylines

      By niZmO_Man · Posted

      8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...