Jump to content
SAU Community

Recommended Posts

Can confirm factory N/A goodness. Plain gts. Did they come with boost/oil pressure in the dash?

Boost no, oil pressure yes... Also sitting tightly waiting the pics of the 32, you did send them to me back when I had my rb but I deleted the message :(

Alright guys, if you want to naturally boost an N/A, follow my write up. It should look something like this:

E7696961-6FDF-4BB9-BDE4-8219288D903A-1571-00000111760B2E04_zps5162b24c.jpg

9EEB2A86-AC53-496A-8A9E-CF9A4FD82540-1571-000001117C182627_zps16a69ed3.jpg

06D084CF-D5A5-4B7A-B7E6-E53CE0D2ECB6-1571-00000111704C700F_zps77161d9c.jpg

The throttle body is harder to get photos of, as it's further up inside the front bar after a hard pipe coming from the intercooler, but it's very self explanatory.

Pod > intercooler > throttle body > piping > car throttle body

Don't forget to gut the AFM and lay all your parts out and make sure you have enough silicone joiners and things like that to make it work.

Post up your pics!

Whoever connected that pod filter should be shot.

putting the hose clamp on the hard pod filter base pushing down on the soft flexible silicon!!!

smallest back fire and that pod filter is going to launch off.

hell get a nice hot day with the silicon softening and it could well drop straight off.

Whoever connected that pod filter should be shot.

putting the hose clamp on the hard pod filter base pushing down on the soft flexible silicon!!!

smallest back fire and that pod filter is going to launch off.

hell get a nice hot day with the silicon softening and it could well drop straight off.

You're an idiot...

There is a hard pipe piece in between the pod and the coupler, it isn't clamping down on silicone!

Plus, the throttle body prevents a backfire coming back through the intercooler.

got a sound clip of tb2 opening?

How?

The intercooler won't fill up with air if the car is stationary and I don't intend on hanging off the front of the car risking my life just to record a sound clip for someone who has nothing positive to say, anyway.

Good son of rajab... Kwaka... I am just going to sit here and applaud.

Why I never thought of cooling ambient air with ambient air is just a kick in the nuts. And I spent all that money on turbocharging my car. You sir... You know your spanner from your shifter. Any other advice on getting power from an NA? Shaving weight off the cams for example?

  • Like 1

Good son of rajab... Kwaka... I am just going to sit here and applaud.

Why I never thought of cooling ambient air with ambient air is just a kick in the nuts. And I spent all that money on turbocharging my car. You sir... You know your spanner from your shifter. Any other advice on getting power from an NA? Shaving weight off the cams for example?

Weight can definitely be shaved off cams by taking material off the cam lobes, unless you know what you're doing though, you shouldn't do it. Valve timing becomes affected.

You didn't waste your money turboing your car, I'm just enlightening everyone to the fact that there's more than one way to skin a cat.

177rwkw in a light 20DE GTS is pretty fun!

Edited by kawasakirider

How?

The intercooler won't fill up with air if the car is stationary and I don't intend on hanging off the front of the car risking my life just to record a sound clip for someone who has nothing positive to say, anyway.

you never heard of go pro

hanging off the car...such a newbie

you never heard of go pro

hanging off the car...such a newbie

I'm a newbie yet you don't know how to intercool an N/A car?

I have heard of a go pro, but have you heard of background noise? The throttle body opening isn't as audible as say, someone hitting gate. The noise is definitely audible but not to that extent. I might get him to do a fly by later.

Plus, I don't have a go pro.

Idk why you need to hear it when you can see it and the dyno sheet is there.

Edited by kawasakirider

I'm a newbie yet you don't know how to intercool an N/A car?

I have heard of a go pro, but have you heard of background noise? The throttle body opening isn't as audible as say, someone hitting gate. The noise is definitely audible but not to that extent. I might get him to do a fly by later.

Plus, I don't have a go pro.

Idk why you need to hear it when you can see it and the dyno sheet is there.

If i run twin throttle bodies will i get 12psi?

If so, i might ditch the 3076 setup and go with that!

If i run twin throttle bodies will i get 12psi?

If so, i might ditch the 3076 setup and go with that!

Not quite, Matt.

Since there's no "forced" induction, you're really relying upon ambient air getting a bit sped up as the throttle body opens. Adding a second one will just slow it all down and probably have a negative effect.

You could get a greater effect on an N/A zed with two intercoolers and two intakes on the same plenum, but that's another story.

Not quite, Matt.

Since there's no "forced" induction, you're really relying upon ambient air getting a bit sped up as the throttle body opens. Adding a second one will just slow it all down and probably have a negative effect.

You could get a greater effect on an N/A zed with two intercoolers and two intakes on the same plenum, but that's another story.

Well based on that i reckon a flat intake with ITB off a GTR would easily be the best option? You could fab them into the end tank?

I'm a newbie yet you don't know how to intercool an N/A car?

I have heard of a go pro, but have you heard of background noise? The throttle body opening isn't as audible as say, someone hitting gate. The noise is definitely audible but not to that extent. I might get him to do a fly by later.

Plus, I don't have a go pro.

Idk why you need to hear it when you can see it and the dyno sheet is there.

with my last NA i was too poor to go to this much effort, I used to just open up the airbox and dump a bag of ice in there, so long as you put drain holes worked a treat..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...