Jump to content
SAU Community

Recommended Posts

Howdy,

I have a car taking up room in my carport as well as a heap of other bits and pieces so everything must go ASAP to make some room!!!

It's a white R33 skyline series 1 1993-1995 with series 2 1996-1997 parts also available as well as random RB30 bits which I have collected over the years!! All prices negotiable, but please no time wasters, if you need anything just post or PM! I dont bite!!

Located in Blacktown minutes off M4, M7 and 10 minutes from M2 I can post at buyer expense depending on what it is.

Prices listed below, will post up additional pics as soon as I pull everything off, all bits are in good working condition unless stated otherwise, if you have concerns please just ask.

GT3071R Ball bearing Turbo w/ internal wastage and actuator Kit which includes:

  • Includes braided oil line
  • Custom 4 inch intake pipe with provisions to match all factory R33 intake pipe
  • BLITZ pod filter
  • Adaptor plate
  • Xforce high flow dump pipe and o2 sensor
  • Great condition perfect blades and no shaft play 10 000kms old - spools up great no lag on RB25 - good for 290rwkw $1,500

Turbo specs verified by GCG -

  • Ball bearing
  • Oil & water cooled
  • T25 turbine inlet flange
  • 5 Bolt turbine outlet flange
  • 400hp - 450hp
  • 0.86a/r Turbine Housing
  • 0.50a/r Compressor Housing
  • 4" Compressor Inlet
  • 2" Compressor Outlet
  • HKS GT2835R Equivalent

post-30339-0-78209200-1360219455_thumb.jpeg

post-30339-0-62858300-1360219470_thumb.jpeg

[post-30339-0-34612500-1360219511_thumb.jpeg

post-30339-0-77277900-1360219503_thumb.jpeg

Manual box R33 Turbo 5 speed box - great condition shifted perfectly - $1,100

R33 Engine RB25DET, long motor with no bolt-ons - 150 000kms - ran great - $1,000

post-30339-0-33207500-1360219423_thumb.jpeg

HKS Genuine Super drager muffler 3inch system inc hi flow CAT and 2 mufflers mid way - excellent condition - sounded tough but not too loud - nice and quiet, can be made louder by removing muffler - $500

post-30339-0-13004300-1360219610_thumb.jpeg

Series 2 front Bar - slight dent on front and pre cut for cooler $150

Series 2 headlight left good condition $300

Series 2 headlight right good condition $300

Series 2 reo $100

post-30339-0-80235100-1360219532_thumb.jpeg

Wolf ECU - $500

Blitz 850cc Injectors in stock rail - $450

GFB Blow OFF Valve with RB adaptor plate - plumb back or trumpet changable - volume adjustable/plumback adjustable at the turn of a dial - $220

16 inch R32 GTST wheels and tyres 90% tread $450

Series 2 Bonnet - straight as - perfect - $400

17x7 inch wheels and tyres 80% tread $300

post-30339-0-10499500-1360219648_thumb.jpeg

HYBRID Front mount intercooler kit - needs a clean/polish $100

UNDERODY - brakes suspension etc.

Front callipers $270

Rear 5 stud hubs $120

Handbrake setup $150

Manual LSD 4:11 tight $200

Driveshafts $180

Stock suspension $150

Rear callipers $140

Front strut brace aftermaket CUSCO? $100

Front lower control arms pair $100

Front rotors $50

Rear rotors $50

Castor rods $50

Front 5 stud hubs $50

Rear lower control arms $50

BODY

post-30339-0-76123500-1360219563_thumb.jpeg

post-30339-0-67879800-1360219593_thumb.jpeg

post-30339-0-51298400-1360219629_thumb.jpeg

Spacesaver $40

Side skirts custom $120

Rear pods $100

Front windscreen $100

Left foggies/blinker $80

Rear windscreen $80

Front guard left $60

Front guard right $60

Door Rubbers full set $70

Series 2 Grill $50

Rear wing series 2 style but a little taller aftermarket? $50

Quarter windows $50

Front door windows $50

Mirrors $40

Tail light left $40

Tail light right $40

Rear garnish $40

Bootlid $40

GTST Badges $40

Genuine Nissan Scissor Jack $40

Mirrors $40

Left Door $30

Right Door $30

Rear bumper $30

Wipers and motors $30

ENGINE BAY

Manual Conversion bits $200

Air con compressor $120

Polished Surge tank setup with Bosch 040 pump $120

OEM Coilpacks $100

S1 engine loom $100

Steering rack $100

Sard Fuel Pressure Regulator FPR with gauge $100

post-30339-0-15500700-1360219578_thumb.jpeg

Power steer rack $80

Radiator $80

Tailshaft $80

Engine mounts $70

Alternator $70

Brake master cylinder $60

Radiator shroud $40

Power Steer bottle and hoses $40

Washer bottle $20

Radiator overflow bottle $20

Fuse box lid $20

RB25 Exhaust manifold $100

INTERIOR

post-30339-0-93900500-1360219542_thumb.jpeg

post-30339-0-62413400-1360219551_thumb.jpeg

post-30339-0-70982000-1360219662_thumb.jpeg

Dash cluster 150xxxkms - worked perfect $120

Drivers side window motor $100

Jap steering boss kit and AUTOTECHNICA wheel $100

Boot trims complete - need a clean$100

Instrument cluster with vents $80

Seatbelts $80

Floor mats front 2 only in checkered series 2 style $80

Ignition barrell and locks $80

Drivers side window switch $60

S1 Door trims and quarter trims - slight marks $50

Passeneger side window motor $50

Series 1 Front seats $50

Steering column surround $50

Gear selector surround and boot $40

Center console $40

Climate control unit $30

Rear seat $30

Rear parcel shelf/child restraints/factory speaker grill $30

Indicator switch $20

Wiper switch $20

Cheers!

Hey mate, do you have the cabin fan available?

do you meant he black on for the AC? and if so yes $40? give me a call or sms 0402*842*180

Are the injectors for rb25?

Yes they are for rb25 in rb25 rail with plugs and everything to plug and play

Hey mate im after the bare doors if theres not dents or scratches and drivers power window switch if its good condition...

have all of them to give me a call or sms 0402*842*180

post-30339-0-68525900-1360396784_thumb.jpg

Boot trims $100 comes with everything

post-30339-0-09119800-1360396800_thumb.jpg

Excedy heavy duty clutch Sports tuff

Near new barely used taking out of parted vehicle, also inlcuding fresh machined flywheel $450 for the lot ONO

post-30339-0-11450700-1360396817_thumb.jpgpost-30339-0-60663200-1360396830_thumb.jpg

Polished Surge tank setup with Bosch 040 pump, comes with all wiring relay and ready to plug and play - fits perfect behind back seats in R33 $120

post-30339-0-67333400-1360397576_thumb.jpg

post-30339-0-43071600-1360397592_thumb.jpg

post-30339-0-74475000-1360397607_thumb.jpg

GFB Blow OFF Valve with RB adaptor plate - plumb back or trumpet changable - volume adjustable/plumback adjustable at the turn of a dial - $220

post-30339-0-63214000-1360397701_thumb.jpg

post-30339-0-65176400-1360397813_thumb.jpg

Complete wreck available!

post-30339-0-14158400-1360396847_thumb.jpg

Sold all below

Turbo kit - still have dump pipe to fit stock turbo

Left headlight

Left foggy blinker

Wiper motor

Grill

Strut brace

Boot trims

hi mate will take the surge tank setup can you give me a call tomorow sometime to sort out payment and postage. cheers 0403423121 Dean

hi mate will take the surge tank setup can you give me a call tomorow sometime to sort out payment and postage. cheers 0403423121 Dean

Will do

Injectors still available

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
×
×
  • Create New...