Jump to content
SAU Community

Wrecking Built R33 Rb25/rb20/sr20 Performance Parts Available - Garrett 3071/blitz/sard/bosch/gfb/wolf/hybrid


Recommended Posts

WOLF V500 Direct plug in ECU for RB25DET R33 - $500, take it away! The current model of this ECU retails at $1,995.80 incl GST:

http://wolfmotorspor...3-gtst-plug-in/

This ECU is a direct plug in ecu which plugs into factory harness - no chopping harnesses or piggy backing harnesses, very clean installation capable of producing great results.

Inludes laptop plug - great condition, like new, also ran great when installed in the car - removed from parted vehicle which was not smashed or damaged at all

Spec attached in pdf. file attached below.

Wolf_V500_Specification_Sheet1.pdf

post-30339-0-83318200-1360648015_thumb.jpg

post-30339-0-21564900-1360648022_thumb.jpg

post-30339-0-45191200-1360648028_thumb.jpg

Link to comment
Share on other sites

Still available below! prices very negotiable!

HKS Super Drager CAT back was $500 now $300

Clutch Kit $200

Series 2 front Bar - slight dent on front and pre cut for cooler $150

Series 2 headlight right good condition $300

Series 2 reo $100

post-30339-0-80235100-1360219532_thumb.j

Blitz 850cc Injectors in stock rail - $450


16 inch R32 GTST wheels and tyres 90% tread $450

Series 2 Bonnet - straight as - perfect - $400

17x7 inch wheels and tyres 80% tread $300

post-30339-0-10499500-1360219648_thumb.j


Front callipers $270 $100

Rear 5 stud hubs $120

Manual LSD 4:11 tight $200

Driveshafts $180

Stock suspension $150 $80

Front rotors $50

Front 5 stud hubs $50

Rear lower control arms $50


post-30339-0-76123500-1360219563_thumb.j




post-30339-0-67879800-1360219593_thumb.j




post-30339-0-51298400-1360219629_thumb.j


Side skirts custom $120 $80

Front windscreen $100

Rear windscreen $80

Front guard left $60

Front guard right $60

Door Rubbers full set $70

Rear wing series 2 style but a little taller aftermarket? $50

Quarter windows $50

Front door windows $50

Mirrors $40

Tail light left $40

Tail light right $40

Rear garnish $40

GTST Badges $40

Left Door $30

Right Door $30

Wipers and motors $30


Misc Manual Conversion bits $200

Air con compressor $120

OEM Coilpacks $100

S1 engine loom $100

Cross member $80

Power steer rack $80

Radiator $80

Engine mounts $70

Alternator $70

Power Steer bottle and hoses $40

Radiator overflow bottle $20

Fuse box lid $20

RB25 Exhaust manifold $50

post-30339-0-70982000-1360219662_thumb.j




Dash cluster 150xxxkms - worked perfect $120

Drivers side window motor $100

Jap steering boss kit and AUTOTECHNICA wheel $100

Instrument cluster with vents $80

Seatbelts $80

Ignition barrell and locks $80

Drivers side window switch $60

S1 Door trims and quarter trims - slight marks $50

Passeneger side window motor $50

Series 1 Front seats $50

Steering column surround $50

Gear selector surround and boot $40

Center console $40

Climate control unit $30

Rear seat $30

Rear parcel shelf/child restraints/factory speaker grill $30

Indicator switch $20

Wiper switch $20

Link to comment
Share on other sites

Still available below! prices negotiable!

HKS Super Drager including high flow CAT back now $250

Series 2 front Bar - slight dent on front and pre cut for cooler $150

Series 2 headlight right good condition $300

Series 2 reo $100

post-30339-0-80235100-1360219532_thumb.j

Blitz 850cc Injectors in stock rail - $450

16 inch R32 GTST wheels and tyres 90% tread $350


Rear 5 stud hubs $120

Manual LSD 4:11 tight $180

Driveshafts $180

Stock suspension $80

Front 5 stud hubs $50

Rear lower control arms $50


post-30339-0-76123500-1360219563_thumb.j




post-30339-0-67879800-1360219593_thumb.j




post-30339-0-51298400-1360219629_thumb.j


Side skirts custom $80

Front windscreen $100

Rear windscreen $80

Front guard left $60

Front guard right $60

Door Rubbers full set $70

Rear wing series 2 style but a little taller aftermarket? $50

Quarter windows $50

Front door windows $50

Mirrors $40 each

Tail light left $40

Tail light right $40

Rear garnish $40

GTST Badges $40

Left Door $30

Right Door $30

Wipers and motors $30 (front motor sold)

Air con compressor $120

OEM Coilpacks $100

S1 engine loom $100

Cross member $80

Power steer rack $80

Radiator $80

Engine mounts $70

Alternator $70

Power Steer bottle and hoses $40

Radiator overflow bottle $20

Fuse box lid $20

RB25 Exhaust manifold $50

post-30339-0-70982000-1360219662_thumb.j




Dash cluster 150xxxkms - worked perfect $120

Drivers side window motor $100

Jap steering boss kit and AUTOTECHNICA wheel $100

Seatbelts $80

Ignition barrell and all locks matching key $80

S1 Door trims and quarter trims - slight marks $50

Passenger side window motor $50

Center console $40

Climate control unit $30

Rear parcel shelf/child restraints/factory speaker grill $30

Indicator switch $20

Wiper switch $20


Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Latest Posts

    • That may or may not be me that replied 😅
    • Your response is extremely similar to what someone on the Haltech tuning tips Facebook page answered me. I take it you're also on there haha. Dyno is booked for June 27th and that's exactly what I'll be doing. I also realized I never setup a pulse width adder table so I went and did that last night. Made a fair bit of fueling difference in low load areas.  I sorted out my power steering belt woes. It was an alignment issue and it has now survived multiple instances of abuse that would have killed it prior. I also changed my fuel pump hose. The hose I replaced looks nothing like the legit gates hose I received. Real hose is actually 5/16" and is labelled properly. Amazon refunded me but has been giving me grief about my nasty review I'm trying to leave... I keep having to modify it for acceptance. I want to make sure the point gets across to others.  Last issue I want to deal with soon is the slight vibration I get in my steering wheel with my GKTech Spacers in front. My annoyance has grown and I'm at a point where I want it resolved. I've tried everything I can come up with like clean spacers thoroughly, tighten in star pattern, retorque, have wheels rebalanced 4-5x with a variety of machines (2x with a Hunter elite). I've also taken the spacers off and remounted multiple times just in case.  I'm starting to think my GKtech spacers are at fault. I'll pop a wheel off and toss a dial indicator on tomorrow to verify runout and parallelism. 
    • What ECU and PDM are you using Roy?
    • True, will I do like a good loud exhaust it cannot be ear bleeding or loud and front on the Hwy Lucky she didn't ask my daughter this question, she wouldn't have got the response she was after for her poll
×
×
  • Create New...