Jump to content
SAU Community

Recommended Posts

1998 Nissan Skyline GTT
around 135,000km
KR4 Silver
Manual Turbo

Recently had a HD Nismo single plate clutch installed. (Firm but not too heavy feel)
Has Stainless Steel Jasma Cat back exhaust, and stainless front pipe.
300x600x76 Front mount intercooler
Nismo clear front indicators.
18" Wheels & good tyres with heaps of tread
OR a set of stocko GTT rims with heaps on them

Vented Carbon fibre Bonnet
Engine is stock and unmodded with excellent compression across the board.
Timing belt, waterpump etc replaced 5000km ago with gates racing belt.
Serviced every 5000km with Castrol Edge synthetic oil.

Bad Points:
Has a Light scratch down passenger side which as you can see by the last 2 pics is visible in some light, and not in others.

NSW Rego to 5th December

Located Just over NSW Border from Vic, Willing to travel basically from melbourne in VIC and as far as Wagga in NSW to meet a buyer (and everywhere inbetween). Good reliable car. Willing to negotiate a little for a quick sale. Preferred Contact is Via Private Message.

post-12420-0-96239900-1361227516_thumb.jpg

post-12420-0-60101900-1361227523_thumb.jpg

post-12420-0-42833400-1361227528_thumb.jpg

post-12420-0-33872000-1361227532_thumb.jpg

You would probally would have sold it by now if it wasnt for the bonnet and wheels, try sought that out and get a good price out of it.

otherwise it looks legit.

Edited by starwarz
  • 1 month later...
  • 4 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...