Jump to content
SAU Community

R34 Gtt Upgrade

Exodus01

By Exodus01,
in Engines & Forced Induction

 Share

Recommended Posts

Exodus01 Community Regular

Exodus01

Posted
Posted

Hi All,

I am looking at upgrading my R34 GTT (RB25DET) and i have a few questions i'd appreciate answers to.

I am sorry if they are basic questions but as i am learning about cars as i go i am quite unsure.

1. I am looking at either a Garret GTX3582R (GT35R) or a Garret GTX3076R (GTX30R) - there is quite a price difference between these turbo's and i am just not sure if it is really worth the 35R or is it a bit over the top for my first upgrade?

2. I am looking at getting the Tomei Poncam Type B Camshaft set and just wanted to know people's experience and thoughts with this? Is it reliable etc?

3. I am looking at getting the Sard 650cc Injector set - is this going to suffice? Should i be looking at 1000cc?

4. The fuel setup; this is where i am really unsure, can i run E85 and 98 simultaneous? Is this recommended? Just after some general information around this.

My current setup is quite basic:

FMIC

POD Filter

Turbosmart BOV

Haltech PS2000 ECU

eboost street boost controller

I am not looking at this becoming a what to buy conversation but answers to this will really help me.

Really appreciate any help.

Link to comment
https://www.sau.com.au/forums/topic/420287-r34-gtt-upgrade/
Share on other sites
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Thread closed. Believe it or not, but since SAU started more than 7 years ago, this topic has been discussed before.

Please use the search function in future. It may be found here:

http://www.skylinesaustralia.com/forums/index.php?app=core&module=search&search_in=forums

While we understand that it can be frustrating to have your thread closed - Please consider that other members may feel it to be disrespectful and selfish of you to post a simple question, without using the search feature to review the wealth of information provided by said members over the years.

If you still feel that this action is unjust, then please PM me and we can discuss it further.

Link to comment
https://www.sau.com.au/forums/topic/420287-r34-gtt-upgrade/#findComment-6758970
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      Hey Murray, hope all is good. I took your advice and put the filler first then the putty. Seems like a much better result but i noticed there are still pinholes. I even had pin holes when i initially put the putty on the body filler. Do you think it has something to do with my spreader being f*cked? I attached some images. This is the intially body filler i sanded. No putty yet  Applying putty. Final result after using wax and grease remover can see the pin holes. I just noticed as i look at the putty application it looks wavy not sure if it's supposed to be like that or because of the spreader.
    • Julsmadrid
      RB25det

      By Julsmadrid · Posted

      Hey all just wanting some advice. I’ve just compression tested my RB25det and these are the following results  Cyl 1 - 135psi Cyl 2 - 135psi Cyl 3 - 120psi Cyl 4 - 140psi Cyl 5 - 130psi Cyl 6 - 125psi   do these numbers seem ok.  Thanks in advance 
    • GTSBoy
      Got this r31 silhouette flood car to rebuild.

      By GTSBoy · Posted

      I must say - this is how I picture all R31s!
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      Rust repairs completed, doors back on! pretty much totally back together running now. All future repairs will be fiddly wiring getting everything back up to road condition.  hasn’t  taken that long considering the condition I got the sub. note my helpers keeping the back seat warm 😂
    • Keeper
      SAU NSW - Old Pac Cruise to Newcastle All Japan Day 2025

      By Keeper · Posted

      SAU NSW Old Pac Cruise to Newcastle All Japan Day 2025 Sunday 27th July 2025 5:00AM Meeting Berowra Station Commuter Car Park 2 5:15AM Departure Cruise Via Old Pacific Hwy 7:45AM Arrival to Lambton Pool (Regroup) 8:00AM Arrival to Newcastle All Japan Day 2025 Meet Location: Berowra Station Commuter Car Park 2 Stop 1: Lambton Pool (Carpark) Final Destination: McDonald Jones Stadium for Newcastle All Japan Day 2025 Tickets: Newcastle All Japan Day 2025 $20 Per Car Spectators Free PURCHASE TICKETS HERE *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...