Jump to content
SAU Community

Another compliance question.... "rebuild" plates???


Recommended Posts

We are looking at an Evo IV for a mate tomorrow, it is apparently not complied, but registered under "Rebuild" or "Rebuilt" plates... it is apparently legal to register these...

Anyone can shed any light ASAP on this :confused:

thanks!

No plates were ever available for evolution IV...they are all rebuilt vehicles with the exception of a few cases of personal import (yellow Tags)Nothing wrong with a rebuilt vehicle at all 100 percent legal

yeah they are legal and they are approved by DOTARS, if at all in doubt submit the VIN numbers and Chassis numbers to DOTARS and have em do a background check, think it costs like 50 quid but you'll be all the more wiser to the history of the car.

no such thing as a rebuild plate duncan and munkey they have nothing to do with dotars......the car would have been bought in for wrecking under the old scheme pre 8th march 2002 or imported as a race car then "stripped" and rebuilt...dotars will not know any history on this vehicle

an engineer will inspect it to make sure the following have been fitted ....original aust delivered seat belts,child restraint anchor points,normal mirror,dimmer switch,ulp filler neck,high mount stop lamp,tyre and emmisions placard,side intrusion bars and new tyres

thought under the old system all plates were issued by Dotars and all engineers reported back to dotars meaning that all paperwork will be archived at their office?

if not then who keeps track of all the paperwork and legal issues concerning the plates?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
    • Hi guys, just after some guidance with an R34 sunroof that has stopped working correctly. It still opens and closes perfectly fine, but it no longer tilts/vents up or down. As a result, the rear of the glass now sags a bit as it drops down slightly in order to retract into the roof, but now it can't pop upwards into a flush position. I’ve probed the pins on the back of the switch connector with a multimeter and it seems like both switches (for open/close and tilt/vent) still work correctly. Any ideas on what it could be, or where I should even start in terms of diagnosing? I'm sure someone's had this issue before but I haven't been able to find anything online relating to this specific issue, most of the issues are with the seals leaking or the motor failing entirely. Thanks in advance!
    • Do you have some data like fuel pressure? It's really hard to say if you're still fighting a fuel system issue at this point. Could be something weird like the FPCM dipping out.
    • Yeah in that case, pulling the dent out. Event a very slight dent can create a lot of work filler-wise and there is a strong chance the panel won't be the factory shape when you are done (as the dent will result in a new high point created somewhere, then everything is brought up to that new high point... but the panel shouldn't be that high if that makes sense).  So you've filled and primed the panel and it is flat, why would you go back and remove the primer and add more filler? 
    • Something else I have been faffing with while the car was off the road is making the AC work. Assuming the car isn't at a thermal limit the idea of having AC while waiting in line to go on track sounds delightful. I have actually been lugging around the weight of the entire system since 2018 when the RB25NEO went in without it working at all.  The main reason was in the first few events before I got around to re-gassing it the rubber hose that runs under the manifold had the factory heat wrap/sleeve fail resulting in this: ~2 years ago I purchased a complete used R32 AC line set but when I finally went to install it the line i needed was different where the expansion section is I found a local place that was able to replace the rubber section and re-crimp. They also added some modern heat sleeve to the hose Tight fit but fingers crossed this is the last physical piece of the puzzle needed
×
×
  • Create New...