Jump to content
SAU Community

Recommended Posts

Cruise to Robertson for a Pie or Pizza with the SAU NSW Clan.

Tomorrow Moaning (Sun 15.9.13)

- 9:30am @ Maccas @ E.P.I.C.

- Leave @ 10am Sharp !!!

Fill Your Tanks & BE THERE !

i dont no full details but i have been told the auto tech in hum is having a dyno day to raise money for charity -

3x runs for $75

day kicking off from 9 am

correct me if i am wrong as i have not seen anything offical just few different ppl have told me..

When this ment to be for?

Cruise to Robertson for a Pie or Pizza with the SAU NSW Clan.

Tomorrow Moaning (Sun 15.9.13)

- 9:30am @ Maccas @ E.P.I.C.

- Leave @ 10am Sharp !!!

Fill Your Tanks & BE THERE !

How's many ppl is expected at this tomorrow? Might come as my car just came back from Autotech

How many are u thinking is gonna show? Also how fars the drive and what time will we get back.

Link to thread ---->> http://www.skylinesaustralia.com/forums/topic/430263-sau-nsw-official-half-way-robertson-meet-up-15913/

Page one has the details.

Should be at least half a dozen of us driving up and quite a few more when we get there. :D

Understood. Next cruise will be more local.

DIY Mik is gonna be fangin round the Sutton Hillclimb today.

Maybe go out and watch?

I would if not for the pie at the end. :)

How many are u thinking is gonna show? Also how fars the drive and what time will we get back.

ended up being around 6ish from act, and 30-40 from our end.

alot stopped at pie shop, but pizza was well worth it, so glad it wasnt as full.

  • 1 month later...

Snowy Mountains 1000 is on in 2 weeks!
Who's going? Who wants to Cruise down and watch?

I will on the Saturday but just realised that's the day I'm getting my Exhaust tweaked but I'm guessing I'd be on the way by 10-10:30am, 11am at the latest. :/

---->> http://www.skylinesaustralia.com/forums/topic/421758-2013-shannons-insurance-snowy-mountains-1000/page-1

  • 2 weeks later...

Snowy Mountains 1000 is on this weekend!

Who's going? Who wants to Cruise down and watch?

I will on the Saturday but just realised that's the day I'm getting my Exhaust tweaked but I'm guessing I'd be on the way by 10-10:30am, 11am at the latest. :/

---->> http://www.skylinesaustralia.com/forums/topic/421758-2013-shannons-insurance-snowy-mountains-1000/page-1

If im not working I'll come for a cruise and check it out :)

I'll be going.

Who else is going to go and watch some mad cars going as fast as they can in a straight 1000m line? :woot:

Well if it goes the way I want it to, May take less than half an hour?

(cut off canon, weld flange *giggles* to pipe, weld flange *g* to muffler, hang it, maybe weld flange *g* to canon incase I want to change it sometimes)

Should be quicker and cheaper than making up a pipe etc like the dude suggested.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...