Jump to content
SAU Community

Recommended Posts

Hi all. I just bought this Stagea today.

http://www.tradingpost.com.au/Automotive/Used-Cars/Small-Medium-Family-Prestige-Cars/AdNumber=D4020102402514

I don't know much about them being a rotary enthusiast, but I have a wife with a baby on the way and couldn't do a Camry.

Forgive me as I just signed up and will be reading all the information in the threads below in due course, but for now I wonder where you guys insure your Stagea's?

Where do you service them, and where would you recommend I go to have the car looked at to see if all is ok?

It has IMPUL and NISMO stickers in the engine bay and seems to "woosh" through whole rev range. It also has a boost controller so I assume something has been changed or do they all woosh the whole time?

Link to comment
https://www.sau.com.au/forums/topic/421587-hi-all-noob-stagea-m35/
Share on other sites

  • Replies 114
  • Created
  • Last Reply

Top Posters In This Topic

Nice car mate. There is definitely a few non standard things on it. Twin exhaust being one that stands out. Thewe cars have a single exhaust standard. Inpul also can mean you have stuff like a remapped ecu. But even standard they have a fair bit of go.

Now the maybe bad bits. I bought my car from ginza the guys are dodgy for sure. The guy who does there approvals for Australia doesn't do a lot of stuff. Make sure he has Changed your tyres as that's something I caught them out on and made them replace. They also don't do any servicing so make sure you get it a very good full service. If you bought his warranty make sure you contact the provider cause with me he threw it in to close the sale but then never logged it meaning I wasn't actually covered.

Hope this has helped but yeah very nice ride hope to see it around

Josh

Thanks mate. Car was advertised for 18 and I said I'll do 15 with one year warranty.

I also had a look under it and said what it that exhaust doing attached to nothing? Not a fan. So he said he will remove it today.So that's gone.

He seemed to know less than me which is always a worry. He said it was a twin turbo and even I know it isn't.

It has these strange badges though. It says infinity across the rear and it has an infinity front badge and also says ARX-Axis in the back.

I can't see any reference to Axis model cars on the net so far?? Any idea??

No the exhaust was purely aesthetic. So it is no longer there.

It seems the Japan owner has put newer model parts on such as the front bumper and mirrors with indicators on them. That's what it seems like to me.

The car itself seems to run and sound fine but I am keen to book it into a work shop somewhere and have it serviced and assessed asap.

Do you guys have a preferred place you service your Stagea's?

I do it myself. You can also hit up Jetwreck on here. The guy is the man in Sydney for m35s. Not sure if he does much in the way of servicing but I would recommend him to you as far as someone to have a look at it

People are stupid that's why. Just be aware when removing badges. The standard ones on our cars are fitted when the paint is still soft so sometimes you will end up with raised lines around the badge. Shouldn't be an issue with the after market ones.

Thats a PNM35, i dont think its arx, it looks like axis to me and whats with the badging overload? :no:

Nope, its an NM35 with PNM35 headlights. The VIN checks out for NM35. Its definitely an AR-X and should have the radar cruise control

Agree with Dunc ^. ARX

It is a little confused that car.

The Impul if still fitted will most likely refer to the ECU. The Impul ECU does a few special things like remove the 180km/h speed limiter, remove any boost cut and adds a bit more fuel.

The Nismo S tune sticker could be Nismo springs and shocks. If they are there, the springs are red in colour.

I notice there are a few things under the dash also.

The car is dead easy to service your self. Have a read of some of the sticky threads about servicing.

GL

if you don't want the Infiniti Front Grille I have the standard ARX Grille here for trade.

I suspect the front bumper bar would need to be changed at the same time.

If your interested, I'd consider a swap.

My coupe has an Infiniti grille so it would kinda match up nicely.

if you don't want the Infiniti Front Grille I have the standard ARX Grille here for trade.

I suspect the front bumper bar would need to be changed at the same time.

If your interested, I'd consider a swap.

My coupe has an Infiniti grille so it would kinda match up nicely.

Given that this car has had the series 2 front end fitted, better check with Cam, who did this swap previously, to find out if they are interchangable...

I do remember that this "simple" swap was a huge pain for him...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
×
×
  • Create New...