Jump to content
SAU Community

New Guy With A Skyline R33 Gtst !

Youii

By Youii,
in New South Wales

 Share

Recommended Posts

500hp Community Regular

500hp

Posted
Posted

Haha I don't think I'm ready for track still getting the hang of it.

I had my mate drive it and he showed me its full potential so when I learn to drive like him then ill take it out on track.

The track is the best place to learn how to drive it, and it's the only place you want to drive it hard.

Take it out to a Texikhana too, very good for learning your driving skills.

are u ok ?
niZmO_Man Grand Master

niZmO_Man

Posted
Posted

^ About time he got a warning. His posted started to annoy me, and I don't moderate here lol.

OP, track days is the best place to learn how to drive as mentioned already. On your first day you will quickly figure out how bad your driving is and adjust to suit. Something as simple as hand placement on your steering wheel. Best to do skidpans/texi as well, as you'll more likely use those skills (for example, controlling a slide if you hit oil) on the road.

My first track day on a wet Oran Park in my crapbox R31 was the most fun I had and learnt so much.

You don't need power for track days. Flush your brake fluid with something decent (Super DOT4 at a minimum), put some decent pads on there (contact GSL Rallysport for some Resma or A1RMs), replace all fluids and filters, etc.

Keep your standard blow-off valve, apart from the lame noise, you have no other reason to get rid of it. It helps with response between gear changes. For boost, stick with standard for now. Once you get used to the car (how it handles, power delivery, fix all the other shit first like brakes, suspension, etc.), you can buy a boost controller (e.g. $30 turbotech) or stick an RB20 turbo actuator (10psi) on there. No point running more than that, reasons mentioned already.

sonicz Rising Star

sonicz

Posted
Posted (edited)

Hmm - you can probably run 12psi then, but yeah, with stock ecu you'll get massive rich-and-retard in the middle (like it has MASSIVE lag in the middle of the RPM curve), then comes on ridiculously strong. If you're not used to it, you'll punch your car into a pole.

If you haven't had a turbo car before, set it to 9psi, have a play with that, and then once you're confident (and I'm still assuming no funny business on the roads), then look at moving it upwards.

When I first got my 33, mine was set to 12psi and it scared the living shit out of me. (admittedly with a Power FC so the midrange grunt was back)

Meh. You make it sound like theres a huge difference between 9 and 12 on a stock GTST. I feel like I can have a cup of coffe while at WOT on 12 psi in my gtst.

That said I find even the speed of stock GTRs boring these days. When I was younger I was like whoa, now its more like, get a move on you POS :D

Edited by sonicz

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      R33 GTR running -9 with no tune

      By joshuaho96 · Posted

      Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
    • GTSBoy
      NC MX5

      By GTSBoy · Posted

      Does that German restaurant still exist in the old place out the NW end of Goulburn? When I say "out the NW end of"...I am really being vague. It was 1997 when I was last there, and the only point of reference I can recall is that it was on the opposite side of the main drag from the big merino. And when I say "opposite side of the main drag", I don't mean "on the main drag". It was either a couple of streets back from there, or might have even been out in the sticks a bit further. Was an old farm building or mill or somesuch. And when I say "the big merino" I might actually be thinking of a completely different part of town, because I just looked on maps and the big bugger is not where I remembered him to be! The food was good, consisting largely of various German mystery-meat sausage/loaf things and kartofflen.
    • GTSBoy
      R33 GTR running -9 with no tune

      By GTSBoy · Posted

      So while the second sentence is completely correct and the whole point of the conversation, the first sentence bears consideration. If this bloke is just hoping to throw big turbos on and drive it around, because there are no helpful facilities at all in his tropical paradise** then he likely has zero chance of even knowing what the TP is on the last column in the stock maps, let alone know whether the ECU is operating anywhere near it or past it. So the point is very very moot. And, per what I said before, at stock boost on those turbos, you may well be off the end of the map. **I'm just back from Vanuatu, so I know exactly what small Pacific nations can be like wrt paradise without requisite facilities. But it's not even that simple. I put a high flow on my car and had to drive it around with a proper tune because of the lack of opportunity*** to put the bigger AFM and injectors into it to allow it to be tuned. I had to turn the boost down to less than I had before, and back off the boost controller's ramp, because it was exploring parts of the map that it didn't drive in before, and really couldn't access for tuning on the dyno either, and so was pinging. It was still well within the last column, because when I first**** set up the Nistune on the Neo I rescaled all axes of the maps to give some more space to explore. ***Family dyno was broken ****This was 13 years ago, and the TIM thing wasn't a thing then and so TP would definitely grow when pushing past the stock tune's limits.
    • joshuaho96
      Squeaking clutch/throw out bearing

      By joshuaho96 · Posted

      Yep, this bit another local owner. I caught it before putting the transmission back into the car, what I noticed was the pressure plate fingers weren't flat and even. It's more obvious with the pull style clutch because the throwout bearing ring was visibly not flat once everything is put together. Nismo should really update their instructions to call out this specific detail. I'm not even sure the clutch as-shipped orients everything properly.
×
×
  • Create New...