Jump to content
SAU Community

S A U - N S W Texikhana - Queen's Birthday Holiday Monday


Recommended Posts

ugh more maps to setup

I have suggestions. Figure 8 skidpan. I can draw it for you if you like? ;op

Also... something that requires entering a largish circle, and going around it a few times, and optionally indicating to exit it. ;o)

ah yeah sorry forgot to respond. yours is fine :)

busy at work as per usual.

No problem at all, as long as you have it i am happy ;)

Did a quick read

If I never done a SAU day but have cams L2 licence how much do I need to pay

Are fire extinguishers mandatory? Due to the no gate rule will bring out the V35 instead of the 14 but dont really want to be hacking that up to mount an extinguisher

As per facebook thread, yes to extinguisher. Read the "first timers" thread linked in the first post for all the details of what you need. (helmet, extinguisher etc)

shouldn't be much if any hassle fitting a fire extinguisher.

how is the bottom part of the back seat held down on a v35, is there a bolt?

if not, you can use a simple piece of aluminium between the passenger seat bolts like we did in the leaf.

leaf_extinguisher2.jpg

randy, facewhatnow?

Oh I paid full amount & I'm a first timer.

Don't mind paying the full, might be bringing my girlfriend along for some passenger rides, can my extra tenner cover that too?

Ha! Nice one man!

Yeah, I'm going to give my wife a couple of rides. And happy to take any other passengers though the day! If I don't break it early!

Innapropriate for an SAU day, but hey i support it :woot: lolz

Considering how bad my driving is, There's every chance I'll be going home a single man.

This would not surprise me :laugh:

I'll be bringing down a gopro 3 on the day as well so i'll be looking for volunteers for car footage :)

If you put it on FeZ25s car put it away from the roof as that's where the car will end up lolz

Guest
This topic is now closed to further replies.



  • Latest Posts

    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
×
×
  • Create New...