Jump to content
SAU Community

S A U - N S W Texikhana - Queen's Birthday Holiday Monday


Recommended Posts

ugh more maps to setup

I have suggestions. Figure 8 skidpan. I can draw it for you if you like? ;op

Also... something that requires entering a largish circle, and going around it a few times, and optionally indicating to exit it. ;o)

ah yeah sorry forgot to respond. yours is fine :)

busy at work as per usual.

No problem at all, as long as you have it i am happy ;)

Did a quick read

If I never done a SAU day but have cams L2 licence how much do I need to pay

Are fire extinguishers mandatory? Due to the no gate rule will bring out the V35 instead of the 14 but dont really want to be hacking that up to mount an extinguisher

As per facebook thread, yes to extinguisher. Read the "first timers" thread linked in the first post for all the details of what you need. (helmet, extinguisher etc)

shouldn't be much if any hassle fitting a fire extinguisher.

how is the bottom part of the back seat held down on a v35, is there a bolt?

if not, you can use a simple piece of aluminium between the passenger seat bolts like we did in the leaf.

leaf_extinguisher2.jpg

randy, facewhatnow?

Oh I paid full amount & I'm a first timer.

Don't mind paying the full, might be bringing my girlfriend along for some passenger rides, can my extra tenner cover that too?

Ha! Nice one man!

Yeah, I'm going to give my wife a couple of rides. And happy to take any other passengers though the day! If I don't break it early!

Innapropriate for an SAU day, but hey i support it :woot: lolz

Considering how bad my driving is, There's every chance I'll be going home a single man.

This would not surprise me :laugh:

I'll be bringing down a gopro 3 on the day as well so i'll be looking for volunteers for car footage :)

If you put it on FeZ25s car put it away from the roof as that's where the car will end up lolz

Guest
This topic is now closed to further replies.



  • Latest Posts

    • Thanks mate, couldn't find in VIC, ended up ordering one from NSW, getting rwc to get new plates and registration done.
    • Before all the EFR fan boys come in, have a look at: https://www.garrettmotion.com/racing-and-performance/performance-catalog/turbo/g-series-ii-g30-825-58mm/ It also comes in a T4 1.06 divided housing. I would dare say if you want response & also decent power, this thing would chop.   AND apologies, just re-read your post, you've already bought the turbo... whatever you do, make sure you stick with divided housing and proper twin scroll manifold.
    • People have got to stop doing that. ShatGPT is not a search engine. It is a hallucination factory.   I also would recommend the 1.05. The .83 will "work" for you , in that it will be more responsive, but I think you'll find that it won't be anywhere near as good running it out to 8000rpm as the big housing will be.
    • Decided for the first time ever I would tow my car TO the track day on the same working theory as bringing tools and spares "if I have it I wont need it, but if I leave it behind i will 100% need it" all setup and ready to go out and try these A050 for the first time First session showed I needed to stiffen up the dampers a touch but still managed a few 1:21's without much effort. things were looking good. Came in a dropped the tyres down  to 26/28 as they had gotten to 35/33C from 22C cold The first lap of session two I managed to drop into 1:20's. Then in the second lap into the second session. Coming into T3 and I suddenly lost brake pedal followed by some huge rear end vibrations and scraping sounds. Got it back into the pits after session ended and found this. in the attached video, all of the wobble is in the hub its self, wheel is mint, and bearing feels tight. lKXLqpd - Imgur.mp4   Deciding it was a bent spindle I tried to find bearing/hub assembly locally but was unsuccessful so it was loaded back onto the trailer i luckily brought it on to drag it back home  
    • 1.05 you’ve gotta let it breath 
×
×
  • Create New...