Jump to content
SAU Community

Recommended Posts

So on the weekend I put different front coilovers in my gtst and now the steering wheel is shaking like crazy at about 120. I don't know if maybe a wheel weight has come off and its just a coincidence that it did it after i swapped struts. Besides an inbalance or a bent rim what could cause this? Could it have anything at all to do with the different coilovers?

Cheers!

Damper adjustable? What settings are you using? Try upping the hardness if it's at full soft.

Wheel shake could also be bad tyres (I had that issue a while ago). Also have a look at your steering rack mounts and bushes.

Yeah damper adjustable and I've got them reasonably firm at the moment. But my front tyres are really bald on the inner edges. Getting a balance today to see if it improves anything. Cheers. Wheel alignment shouldn't really cause shaking though I don't think.

Yeah damper adjustable and I've got them reasonably firm at the moment. But my front tyres are really bald on the inner edges. Getting a balance today to see if it improves anything. Cheers. Wheel alignment shouldn't really cause shaking though I don't think.

mine would shake on the freeway around 110...turns out it was toeing out, on one side more than the other...not sure why, just wear and tear on bushes I suspect.. Probably caused by 200,000kms of my aggressive turning to the left or something I dunno..lol

...once aligned it was fine, even with the crappy tyres..

If you have issues best thing is usually take it to a alignment shop..I mean we can all sit here and play guessing games or you can just go spend 50$ and find out the problem and hopefully have it rectified,,,

Iv'e had this same issue with the same car since I bought the car.

I've changed radius rod bushes. Got new tyres. Balanced them. Twice. Dad 3x Front and Back Wheel alignments. Still have the problem.

I'm thinking its the aluminium spacers on the wheels. They just fit looselely over the studs and move around until you bolt the wheel in place. Obviously causing balance issues.

I need to find a way to stick spacers perfectly to the back of the wheel instead of the hubs.

OR better, does anyone know of any spacers that fit Perfectly centre on the stock GTS-t hubs?

Iv'e had this same issue with the same car since I bought the car.

I've changed radius rod bushes. Got new tyres. Balanced them. Twice. Dad 3x Front and Back Wheel alignments. Still have the problem.

I'm thinking its the aluminium spacers on the wheels. They just fit looselely over the studs and move around until you bolt the wheel in place. Obviously causing balance issues.

I need to find a way to stick spacers perfectly to the back of the wheel instead of the hubs.

OR better, does anyone know of any spacers that fit Perfectly centre on the stock GTS-t hubs?

isnt this why you buy hub centric spacers :blink:

isnt this why you buy hub centric spacers :blink:

Yea I guess so but I've only recently turned my attention to this and I'm new to it all. I took it to a wheel shop about the problem. Got them to fit another set of my own supplied control arms and hubs and they said they'll fit hubcentreic spacers on it but when I got the car home it was just loose aluminium plates with universal holes to fit the studs on them.

I only need about 10mm extra clearance on top of stock hubs so the rim spokes dont hit the brakes.

http://www.isc-performance.com/oilcoolers.html

These look huge.

Got a balance and all good ! Thanks for the help lads

Got to hear. Damn your luck :)

Edited by sonicz

Should have taken it back to them and ask wtf is this slip on crap.

GKTech have wheels spacers as well ;)

Man I don't mind slip on if its hub centric and properly symmetrical. My impression was this is what they will fit.

Thanks for pointing me to Gktech!

I found these

http://www.gktech.com/index.php/4-5x114-3-10mm-hub-centric-slip-on-spacers.html

That's all I friggin need :D Don't need the ones with the studs.

Ordering on Monday. Though I don't know what exactly "on back order" means in terms of how long till I get them

Maybe I should just go for the 15mm ones in stock and hope I don't need to flare the guards. I'll have a wider track. :cheers:

Edited by sonicz

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...