Jump to content
SAU Community

Recommended Posts

Hey every one, Ive got a R32 Rb20det Gtst thats only getting around 250kms per tank with BP98 driving sensibly. It has a 3" straight through exhaust, a big front mount and a RB25 turbo.

I cant find a reason why im getting such low K's!

Could it be it just needs a tune with those mods?

Could any one suggest any thing to check please.

Link to comment
https://www.sau.com.au/forums/topic/424762-fuel-consumption/
Share on other sites

how many litres are you calling a "full tank"? the tank is 65L. are you running it until the car simply runs out of fuel? are you running it until the fuel light comes on, cause there is roughly a 10L difference in amount of fuel used there. and if the light isn't coming on before you get fuel then there could be anywhere up to about 20L of difference in fuel used.

so how about you start calculating your actual fuel economy in litres per 100kms driven, and then we can give you an indication of whether you are just getting the typically poor fuel economy that turbo skylines get, or whether you have something actually wrong.

Ok so that's roughly 16l/100kms. Depending on how you drive then that's only slightly poor economy. If you like to give it a squirt and do a fair bit of driving in stop/start traffic then it isn't too bad. If you do plenty of highway driving then it is a bit crappy

As above the fuel light is ridiculously conservative. Your R32 may be different but on my R33 I have seen the fuel light come on at 1/4 tank before!! I wait until my needle first drops BELOW the empty mark and then I know I have about 10 litres left in the tank and a range of around 50km before I really should fill up. I can consistently put in between 55L and 58L so you are filling up way too soon.

km per tank is meaningless, unless you are really pushing it close to empty it's not "a tank" anyway. The ONLY way to tell people your consumption is in litres per 100km.

My r33 gets around 12.5L/100km in typical, gentle driving to and from work. Bear in mind I have minimal start-stop traffic it's usually cruising at a steady 60-80km/h depending on the speed zone. If you are in start stop traffic your consumption goes to poo. If you put the boot into it your consumption goes to poo. If your O2 sensor is stuffed or you got a cheap tune your consumption goes to poo. I did a tank recently after flogging my car more than usual and it was above 14L/100km, it surprised me. But that's a car that I know is in perfect nick because I always get great economy on it. A dud O2 sensor will easily cost you more in fuel.

As above, there are so many variables in fuel economy. If you let the car suit and idle for a while before driving then you will get worse economy (and it's not needed). While low revs help economy, low amounts of throttle help more. If you floor it but only rev to 3500rpm you will use more fuel than someone who revs to 4500rpm but uses light throttle. Also driving short trips will result in poor economy.

There are mechanical issues that can cause poor fuel economy though. O2 sensor as already mention, dodgy thermostat (if the car doesn't come up to temp within about 5 mins if driving then get a new thermostat), dirty air flow meter, sticky brakes.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...