Jump to content
SAU Community

Recommended Posts

Posting on behalf of a mate

Hes in the market for a track car and some times drags, hes currently tossing up between either the 32 or 33 GTSTs.

The car will be completly stripped and will run a mild RB25 and manual in which he already has in his shed.

Brakes will be upgraded to 33 GTR items again as he already has them.

Is there any benifets going a 32 or 33 over one another? knowing they will both run the same engine and brakes plus be stripped?

Is it to easy to say the 32 will be better due to the lighter weight to begin with?

any other benifets from one or the other?

Link to comment
https://www.sau.com.au/forums/topic/424987-32-vs-33-gts-t/
Share on other sites

stripped down there will be bugger all weight difference between the 2. the 32 may be a fraction lighter, but not much. it's only about 50kg in road going spec, so stripped down i'd say it would be less, given that some of the weight difference between a 32 and 33 is from the heavier rb25 engine, gearbox, etc, which would all be going into the 32 anyway. but the 33 has better suspension as said, and it may well be a bit more aero dynamic, so faster.

Link to comment
https://www.sau.com.au/forums/topic/424987-32-vs-33-gts-t/#findComment-6845838
Share on other sites

I have a R33 GTS-T, just finished it actually. I have now tracked it twice and gotta say it's a great thing.

It's not overly powerful (280kw) or light for that matter (1300kgs) but it's fairly quick for what it is. (1:44 EC full circuit)

It's something I could drive all day in an enduro or similar, very user friendly and easy to pedal.

I always thought the 33 were the ugly ducklings, but I've really grown to like this one.

Link to comment
https://www.sau.com.au/forums/topic/424987-32-vs-33-gts-t/#findComment-6845863
Share on other sites

Thanks mate

I took him in my full weight R33 GTR 333kws at mallanats and he wants something nearly comparable.

So his goal would have to be around a stripped fully car with near 400kws and drag slicks i should imagine to be comparable?

Link to comment
https://www.sau.com.au/forums/topic/424987-32-vs-33-gts-t/#findComment-6845998
Share on other sites

A stripped GTS-T would be almost 200kg lighter than a full weight GTR so there's no way he'll need 400kw to be comparable.

I would think 300kw would be enough given the weight difference. All he'd need to do is work out how to get the power through two wheels effectively.

Link to comment
https://www.sau.com.au/forums/topic/424987-32-vs-33-gts-t/#findComment-6846015
Share on other sites

R33 far better car in just about every way bar looks. If you have a tuff looking 33 than that's a win all round. I have a r32 race car and have owned quit a few road going 32 but I wont buy another one. R33 or 34 is the go.

You will never get a gtst to put power down the way a gtr does. My tuner runs the fastest track skyline around our area and while that is a gtst and eats all gtrs he has driven Plenty of gtrs and can't believe how fast they accelerate out of corners ect. It's just different and can't be matched.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/424987-32-vs-33-gts-t/#findComment-6846510
Share on other sites

The RWD Gtst can get the power down just fine when the suspension is done right.

I wouldn't say the R33 has massively better suspension, its improved but still has the fundamental problems of the R32 still.

The R33 body shell is only beefier in the rear strut area. Otherwise they are very much the same as the R32.

After doing brightys R33 I think the 33 has a lot of potential to be a good thing.

Link to comment
https://www.sau.com.au/forums/topic/424987-32-vs-33-gts-t/#findComment-6846919
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...