Jump to content
SAU Community

Recommended Posts

It's caused by having too much negative camber for the type of driving you do. If you drive in a straight line most of the time (ie, not on a track) then you cannot have much neg camber or you will wear the insides of the tyres. At the rear, the problem is made worse if you like to spin them up.

And yes, this is caused by being too low. As you lower Skyline rear suspension you automatically gain neg camber. You need adjustable polyurethane upper inner bushes at a minumum, or adjustable upper arms.

This has been discussed at great length, including recently, including the legalities of the various options. So have a look around.

Link to comment
https://www.sau.com.au/forums/topic/425081-tire-wear/#findComment-6847416
Share on other sites

Have this same problem, but didn't realise until recently.

I dont track or spin the rears, just normal daily street driving. My car is lowered and has -2 camber from what was on my receipt when i got my wheels aligned after the drop.

Link to comment
https://www.sau.com.au/forums/topic/425081-tire-wear/#findComment-6847803
Share on other sites

yes there are shops and i cant suggest any cos im in sydney but i just want to reiterate that if you want to stay lowered then you will have to use adjustable bushes to eliminate camber OTHERWISE if you purely want to adjust coilovers to eliminate camber you may be going back to stock height.

Link to comment
https://www.sau.com.au/forums/topic/425081-tire-wear/#findComment-6848616
Share on other sites

yes there are shops and i cant suggest any cos im in sydney but i just want to reiterate that if you want to stay lowered then you will have to use adjustable bushes to eliminate camber OTHERWISE if you purely want to adjust coilovers to eliminate camber you may be going back to stock height.

How much am i looking at for adjustable bushes, and do most mechanics/tyre places have them readily available?

Link to comment
https://www.sau.com.au/forums/topic/425081-tire-wear/#findComment-6849069
Share on other sites

Pretty much no mechanic or tyre place will have adfjustable bushes to suit any car (except maybe Commodores!) in stock. Pretty much any tyre place cannot be trusterd to spin spanners so discount them immediately. Pretty much any mechanic could order bushes in within a day. If you fit bushes you need a set for the upper inners and a set for the inside/front ends of the radius arms as well. This will cost you a couple of hundred.

The arms need to come off and a press used to get the old bushes out and new ones in most of the time. The labour will probably end up costing more than the bushes.

Adjustable arms that have rose joints on the end (like the GKTech ones) are not street legal. Adjustable arms with bushes (such as Hardrace ones) probably are.....but you might be in for an argument with a cop and then the pain of getting it defected and having to clear the defect anyway.

Link to comment
https://www.sau.com.au/forums/topic/425081-tire-wear/#findComment-6849111
Share on other sites

Rose joints. Heim joints. Ball joints. They're metal on metal. Really good location and articulation, but......extra NVH, they wear out because they get grit in them, they are an instant defect should a cop see them, and sometimes the cheap ones are shit quality and break.

Hard Race is a brand that does adjustable arms and the like but with hard rubber bushes in them instead of the rose joints used in most adjustable arms. There are one or two other brands out there that do the same. Bushes are squidgy material between two shells to allow arms etc to have some compliance instead of hard metal-metal contact.

Link to comment
https://www.sau.com.au/forums/topic/425081-tire-wear/#findComment-6849766
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Before all the EFR fan boys come in, have a look at: https://www.garrettmotion.com/racing-and-performance/performance-catalog/turbo/g-series-ii-g30-825-58mm/ It also comes in a T4 1.06 divided housing. I would dare say if you want response & also decent power, this thing would chop.   AND apologies, just re-read your post, you've already bought the turbo... whatever you do, make sure you stick with divided housing and proper twin scroll manifold.
    • People have got to stop doing that. ShatGPT is not a search engine. It is a hallucination factory.   I also would recommend the 1.05. The .83 will "work" for you , in that it will be more responsive, but I think you'll find that it won't be anywhere near as good running it out to 8000rpm as the big housing will be.
    • Decided for the first time ever I would tow my car TO the track day on the same working theory as bringing tools and spares "if I have it I wont need it, but if I leave it behind i will 100% need it" all setup and ready to go out and try these A050 for the first time First session showed I needed to stiffen up the dampers a touch but still managed a few 1:21's without much effort. things were looking good. Came in a dropped the tyres down  to 26/28 as they had gotten to 35/33C from 22C cold The first lap of session two I managed to drop into 1:20's. Then in the second lap into the second session. Coming into T3 and I suddenly lost brake pedal followed by some huge rear end vibrations and scraping sounds. Got it back into the pits after session ended and found this. in the attached video, all of the wobble is in the hub its self, wheel is mint, and bearing feels tight. lKXLqpd - Imgur.mp4   Deciding it was a bent spindle I tried to find bearing/hub assembly locally but was unsuccessful so it was loaded back onto the trailer i luckily brought it on to drag it back home  
    • 1.05 you’ve gotta let it breath 
    • You have to continuously fill it to avoid dry running. Personally the transmissions I've serviced have never been bad enough to justify doing this because it is definitely a pretty complicated and somewhat risky procedure compared to simply draining the pan, measuring what came out, then refilling with the exact same amount.
×
×
  • Create New...