Jump to content
SAU Community

[Fs Nsw] 1990 Nissan Skyline Gtr R32

staticc
 Share

Recommended Posts

staticc Collaborator

staticc

Posted
Posted

For Sale is my beloved GTR.

It has all the stuff you need, it has an Apexi Power FC with hand controller, Greddy Profec B II Boost Controller, RS*R exhaust, Splitfire Coil Packs, Rear GT wing, DTM18" Rush shadow chrome rims, Adjustable caster rods, Blistien front shocks, Sparco Racing drivers seat, Blitz BOV, Sound System, and HID kit.

It has done a touch over 151,000kms, serviced every 5000km.

The paint work on it has a couple of blemishes, but its the only thing wrong with the car. It's a pleasure to drive and has plenty of potential to be a very quick car.

Currently makes 186awkws which is quick on the street, as this is my daily driver. Please no swaps, I have a deposit on another car. I am going to be quite firm on this price as need the cash to fund my next car. And will throw in all my spare parts for the car. They will not be sold seprately:

- R33 Crankshaft

- Forged Pistons

- SARD 700CC Injectors

- Full Genuine Nissan Engine Gasket Kit

- Nismo Fuel Reg


A deposit will be taken for serious buyers.

The car is situated in Richmond / Windsor area in NSW - And I can be contacted on 0400629822 or via PM or email [email protected]

I also made a video walkaround, which I can send a link if interested.

The price of the car is $12,800.

Cheers

post-87170-0-52423900-1368695581_thumb.jpg

post-87170-0-39056500-1368695604_thumb.jpg

post-87170-0-45024400-1368695625_thumb.jpg

post-87170-0-64337100-1368695642_thumb.jpg

post-87170-0-05080400-1368695663_thumb.jpg

post-87170-0-48799300-1368695741_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/425383-fs-nsw-1990-nissan-skyline-gtr-r32/
Share on other sites
staticc Collaborator

staticc

Posted
  • Author
Posted

Yeah the tune is conservative for reliablility. It has more potental for power and the new buyer will easily be able to unlock it with a better tune.

Thanks mate, appreciated.

  • Like 1
Memphisxxx1 Community Regular

Memphisxxx1

Posted
Posted

Yeah the tune is conservative for reliablility. It has more potental for power and the new buyer will easily be able to unlock it with a better tune.

Thanks mate, appreciated.

They come factory at 205kw so that would be safe and reliable! why down tune such a beautiful creature?

staticc Collaborator

staticc

Posted
  • Author
Posted

Its at the wheels. So its making a bit more power then stock.

I wanted to build it up over time, but money always being the key, I just cant do it anymore. I wanted it always to be safe power until it was built. Now it can be someone elses little project :)

G0Z1LLAAAAA34 Rising Star

G0Z1LLAAAAA34

Posted
Posted

They come factory at 205kw so that would be safe and reliable! why down tune such a beautiful creature?

Standard R32 GTRs with stock 10psi boost should make around 160kw at the wheels. 206kw is at the fly wheel figure.

staticc Collaborator

staticc

Posted
  • Author
Posted

I'm not a professional when it comes to tuning. I know the tune can be a lot better, but I know I won't blow anything up.

Plus I think its gotten a bit off topic, I'm trying to sell it as I have another car ready and would like to find a good home for it.

luke gtr Grand Master

luke gtr

Posted
Posted

I'm not a professional when it comes to tuning. I know the tune can be a lot better, but I know I won't blow anything up.

Plus I think its gotten a bit off topic, I'm trying to sell it as I have another car ready and would like to find a good home for it.

sorry, didnt mean to come across talking down, rather, just another line of thought.

could you swap the factory injectors and ecu back in for a higher/factory power figure?

sell the other parts separately?

either way, its a cheap price.

glws.

staticc Collaborator

staticc

Posted
  • Author
Posted

Let the bloke sell his car cmon

Thanks man, its ok. Atleast they are talking about it lol.

sorry, didnt mean to come across talking down, rather, just another line of thought.

could you swap the factory injectors and ecu back in for a higher/factory power figure?

sell the other parts separately?

either way, its a cheap price.

glws.

Those parts are not in the car and not tuned for it. It was apart of the plan.

I want the car gone, and I hope the parts are a good sweetner.

Cheers man, it hasn't been too good of luck so far :P

G0Z1LLAAAAA34 Rising Star

G0Z1LLAAAAA34

Posted
Posted

I'm not a professional when it comes to tuning. I know the tune can be a lot better, but I know I won't blow anything up.

Plus I think its gotten a bit off topic, I'm trying to sell it as I have another car ready and would like to find a good home for it.

Like I was trying to tell the others who commented about the "low power figure". Stock R32 gtr makes around 160awkw on stock boost. So the power your car makes is completely normal. Good luck.

Memphisxxx1 Community Regular

Memphisxxx1

Posted
Posted (edited)

Standard R32 GTRs with stock 10psi boost should make around 160kw at the wheels. 206kw is at the fly wheel figure.

Standard R32 GTRs with stock 10psi boost should make around 160kw at the wheels. 206kw is at the fly wheel figure.

SHhhhh Im trying to ask the SELLER a question! I dont want to know about specs I want to ask the SELLER a question Ta Ta :)

Edited by Memphisxxx1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...