Jump to content
SAU Community

Recommended Posts

For Sale is my beloved GTR.

It has all the stuff you need, it has an Apexi Power FC with hand controller, Greddy Profec B II Boost Controller, RS*R exhaust, Splitfire Coil Packs, Rear GT wing, DTM18" Rush shadow chrome rims, Adjustable caster rods, Blistien front shocks, Sparco Racing drivers seat, Blitz BOV, Sound System, and HID kit.

It has done a touch over 151,000kms, serviced every 5000km.

The paint work on it has a couple of blemishes, but its the only thing wrong with the car. It's a pleasure to drive and has plenty of potential to be a very quick car.

Currently makes 186awkws which is quick on the street, as this is my daily driver. Please no swaps, I have a deposit on another car. I am going to be quite firm on this price as need the cash to fund my next car. And will throw in all my spare parts for the car. They will not be sold seprately:

- R33 Crankshaft

- Forged Pistons

- SARD 700CC Injectors

- Full Genuine Nissan Engine Gasket Kit

- Nismo Fuel Reg


A deposit will be taken for serious buyers.

The car is situated in Richmond / Windsor area in NSW - And I can be contacted on 0400629822 or via PM or email [email protected]

I also made a video walkaround, which I can send a link if interested.

The price of the car is $12,800.

Cheers

post-87170-0-52423900-1368695581_thumb.jpg

post-87170-0-39056500-1368695604_thumb.jpg

post-87170-0-45024400-1368695625_thumb.jpg

post-87170-0-64337100-1368695642_thumb.jpg

post-87170-0-05080400-1368695663_thumb.jpg

post-87170-0-48799300-1368695741_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/425383-fs-nsw-1990-nissan-skyline-gtr-r32/
Share on other sites

Yeah the tune is conservative for reliablility. It has more potental for power and the new buyer will easily be able to unlock it with a better tune.

Thanks mate, appreciated.

  • Like 1

Yeah the tune is conservative for reliablility. It has more potental for power and the new buyer will easily be able to unlock it with a better tune.

Thanks mate, appreciated.

They come factory at 205kw so that would be safe and reliable! why down tune such a beautiful creature?

Its at the wheels. So its making a bit more power then stock.

I wanted to build it up over time, but money always being the key, I just cant do it anymore. I wanted it always to be safe power until it was built. Now it can be someone elses little project :)

They come factory at 205kw so that would be safe and reliable! why down tune such a beautiful creature?

Standard R32 GTRs with stock 10psi boost should make around 160kw at the wheels. 206kw is at the fly wheel figure.

I'm not a professional when it comes to tuning. I know the tune can be a lot better, but I know I won't blow anything up.

Plus I think its gotten a bit off topic, I'm trying to sell it as I have another car ready and would like to find a good home for it.

I'm not a professional when it comes to tuning. I know the tune can be a lot better, but I know I won't blow anything up.

Plus I think its gotten a bit off topic, I'm trying to sell it as I have another car ready and would like to find a good home for it.

sorry, didnt mean to come across talking down, rather, just another line of thought.

could you swap the factory injectors and ecu back in for a higher/factory power figure?

sell the other parts separately?

either way, its a cheap price.

glws.

Let the bloke sell his car cmon

Thanks man, its ok. Atleast they are talking about it lol.

sorry, didnt mean to come across talking down, rather, just another line of thought.

could you swap the factory injectors and ecu back in for a higher/factory power figure?

sell the other parts separately?

either way, its a cheap price.

glws.

Those parts are not in the car and not tuned for it. It was apart of the plan.

I want the car gone, and I hope the parts are a good sweetner.

Cheers man, it hasn't been too good of luck so far :P

I'm not a professional when it comes to tuning. I know the tune can be a lot better, but I know I won't blow anything up.

Plus I think its gotten a bit off topic, I'm trying to sell it as I have another car ready and would like to find a good home for it.

Like I was trying to tell the others who commented about the "low power figure". Stock R32 gtr makes around 160awkw on stock boost. So the power your car makes is completely normal. Good luck.

Standard R32 GTRs with stock 10psi boost should make around 160kw at the wheels. 206kw is at the fly wheel figure.

Standard R32 GTRs with stock 10psi boost should make around 160kw at the wheels. 206kw is at the fly wheel figure.

SHhhhh Im trying to ask the SELLER a question! I dont want to know about specs I want to ask the SELLER a question Ta Ta :)

Edited by Memphisxxx1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
    • Yeah, I guess its pretty easy to get to if this doesn't work. Just wait till next oil change and pull it out. I am going to have to do the oil pan gasket soon and thought I'd just replace it while I was there.  Thanks
    • All that matters is you're safe and you were able to type that post. Hopefully heaps of parts you can recover for the next shell.  
×
×
  • Create New...