Jump to content
SAU Community

Recommended Posts

looking at getting an engine rebuilt but also considering a new engine as everything is new, an quality should be good, would like the engine to be able to handle 400kw atw without babying it at all.

I guess most people have made this decision, an have done alot of research so your thoughts would be appreciated

i see just jap sell the N1 spec for 15k

tomei do the advanced spec for bout 20k plus getting it here

not sure who else does one. not sure if the n1 would handle the power i know the tomei would.

an the n1 spec engine has a 34 diff, n i got a 33, though also need a new clutch n gear box, so probably wouldnt be a massive deal. though the 34 gear boxes seem to be around 9k instead of 3k.

Link to comment
https://www.sau.com.au/forums/topic/425653-crate-engines/
Share on other sites

There is nothing special about an N1 spec engine. Total waste of such a large some of money. All that money for a standard stroke crank?

Rips is a good option if you want a 3.0. With the Yen how it is ATM, the Tomei (2.8) might not be THAT bad...

Link to comment
https://www.sau.com.au/forums/topic/425653-crate-engines/#findComment-6860023
Share on other sites

There is nothing special about an N1 spec engine. Total waste of such a large some of money. All that money for a standard stroke crank?

Rips is a good option if you want a 3.0. With the Yen how it is ATM, the Tomei (2.8) might not be THAT bad...

Yeah $15K for a N1 RB26 is a bit steep.

Although it has very high potential, there is cheaper and just as good, if not better out there.

As Racepace can build a Stage 1 engine that can handle up to 400kW for $10K.

Link to comment
https://www.sau.com.au/forums/topic/425653-crate-engines/#findComment-6860099
Share on other sites

Can you tell me how race pace build a 400 kw motor for 10 k ,what parts do they use ,as it sounds cheap does that include labour only reason I ask is a good oil pump alone is 1600 dollars,

They take your existing RB26 and rebuild it from bottom up.

For a quick run down:

Block / Head machined to Racepace specs / Strengthen / Blueprint Block similar to N1 specs.

Block is bored, honed, decked, crank tunnel line honed to Racepace specs.

Modified oil / tap / water galleries, fit threaded plugs / welsh plugs.

Pistons / Piston Rings / Conrods / Crankshaft are a mixture of OEM (Racepace Modified) / N1 / Nismo / Custom.

They use a Nissan N1 Oil Pump (Modified) even though a lot of people talk shit about N1 Oil Pumps, Racepace make it work.

Cylinder Head: Replace valve guides / stem seals, cut seats, face valves, match chambers, surface, re-shim valve clearances to RPM specs

Modified Combustion Chamber Shape.

Labour is included.

Link to comment
https://www.sau.com.au/forums/topic/425653-crate-engines/#findComment-6860177
Share on other sites

That is a great price for that sort of money,I have heard they do a lot of R/D on certain standard parts i have been in Bens personal black r34 gtr as it is now in Perth it goes hard and seemed very reliable ,plus the engine bay looked completely stock,

Link to comment
https://www.sau.com.au/forums/topic/425653-crate-engines/#findComment-6860199
Share on other sites

That is a great price for that sort of money,I have heard they do a lot of R/D on certain standard parts i have been in Bens personal black r34 gtr as it is now in Perth it goes hard and seemed very reliable ,plus the engine bay looked completely stock,

Yes, that's correct about the R/D, so they know what parts work well together.

I remember that black R34 GTR, it's so nice!

Link to comment
https://www.sau.com.au/forums/topic/425653-crate-engines/#findComment-6860214
Share on other sites

Yeah $15K for a N1 RB26 is a bit steep.

Although it has very high potential, there is cheaper and just as good, if not better out there.

When you look at it, they really are an N1 block, slightly different pistons (still cast), N1 water and oil pump. Just to add insult, it's still a standard stroke crank.

If you're going to be spending all this money, you'd have rocks in your head not to go some sort of stroked engine.

Link to comment
https://www.sau.com.au/forums/topic/425653-crate-engines/#findComment-6860332
Share on other sites

When you look at it, they really are an N1 block, slightly different pistons (still cast), N1 water and oil pump. Just to add insult, it's still a standard stroke crank.

If you're going to be spending all this money, you'd have rocks in your head not to go some sort of stroked engine.

And just to add, it does not come with turbo's either...

Link to comment
https://www.sau.com.au/forums/topic/425653-crate-engines/#findComment-6860626
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...