Jump to content
SAU Community

Rb25/30 Parts Cleanout Motor Package

Johnny_B
 Share

Recommended Posts

Johnny_B Enthusiast

Johnny_B

Posted
Posted

RB25 head, complete but dismantled, no cam gears, spool head drain $300

RB20/25/26 tomei cam gears inlet and exhaust brand new $200

RB26 itb's to RB25 head adapter plates and hks itb gaskets $400

RB20/25/26 stainless steampipe twin scroll manifold $800

tial 44mm wastegate $200

RB25/30 bottom end, fresh bored and 0 deck block, mahle forged pistons (depending on head cc was setup for 8.9.1 compression), spool I beam rods, ross race balancer, crank grub screwed and wide oil drive, arp main and head studs, new nissan water pump, nismo thermostat, includes bearings, ready for assembly $2500

jim berry full monty race clutch, balanced fly wheel $800

series 2 power fc, hand controller and z32 afm $1000

all items located in Launceston Tasmania will ship at buyers expense

pictures available on request

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/425934-rb2530-parts-cleanout-motor-package/
Share on other sites
Joshbigt62r Proficient

Joshbigt62r

Posted
Posted (edited)

Is the manifold a steampipe or stainless?

Can you pls send me pics of the wastegate and manifold please. Who made the manifold?

0400215126

Edited by Joshbigt62r

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...