Jump to content
SAU Community

FS: Digital dash and rs232 for stock ecus

Impakt
 Share

Recommended Posts

  • 2 weeks later...
  • Replies 269
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Duncan Grand Master

Duncan

Posted
Posted

nope it doesn't read knock sensor values, the consult port does not make them available.

Otherwise it is great, we started my engine for the first time after the rebuild today, and it was great having the display to make sure everything is OK

Impakt Collaborator

Impakt

Posted
  • Author
Posted

all 5 wires are needed to get everything to work. There is not one wire which it needs to get the ignition timing.

I have *heard* that connecting up your own consult port works with the CA18 ecu (consult is supported, but Nissan never hooked it up). I haven't seen this with my own eyes so i dont know how true it is.

Impakt

midnight Experienced

midnight

Posted
Posted

I have spent the last hour researching it and am having trouble finding wheather the ecu has the Tx Rx and clk. The only ecu diagrams I have don't have them listed.

I have also heard of a guy with a datto 1600 running a ca18det who has hooked up a consult port

midnight Experienced

midnight

Posted
Posted

not really much, just some guy told me the supposed tx, rx, and clk pinout from the ecu, I dont want to post it up untill I have evidence that its correct or Ive tested it incase it frazzles ecus.

  • 2 weeks later...
Iopia Experienced

Iopia

Posted
Posted

i ve had my screen a couple of days and it is awesome already found a couple of problems that were easily fixed and have probably saved me the cost of the screen.

However i cant seem to get the software to work I am using a USB to serial converter which seems to be working (getting Rx lights flashing) but software wont connect.

Oosh Veteran

Oosh

Posted
Posted
Interesting, we had the same problem with a serial to USB converter....but a second model worked fine?

I had some problems, it'd create a virtual serial port 3 and it wa a no go, but if i disable the REAL serial port 2 and force the virtual to serial port 2 THEN it worked. Go figure?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 GTST Axles

      By GTSBoy · Posted

      There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • jdniss
      Forced Performance Hta Turbos

      By jdniss · Posted

      Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • thozza
      Intro/R33 owner

      By thozza · Posted

      Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Lithium
      Forced Performance Hta Turbos

      By Lithium · Posted

      Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
    • tidi0x
      R33 GTST Axles

      By tidi0x · Posted

      The axels in my R33 seem tired, and have a bit of play in them. I cannot find any new of course, not interested in buying used, but I am looking to see if anyone can identify some cross compatible axles. In the states I have seen suggested for S chassis the J30 axles, however for the skyline (as best I can tell) the lengths are about an inch off (2.5cm) on both sides. R33 my measure L 22" R 24.5" GPT L 22.5" 24.25" J30 L 23.5" 25.5"  so shaft length is probably an inch wider. Not sure if someone has another still remanufactured option besides the J30. I figured worst case I can buy a pair tear them down and swap the center shaft. My other option was reaching out to GSP to see if they cannot piece together a set, since the axle stubs are still manufactured, I wouldn't think it be that hard to find a shaft or make a shaft work. 
×
×
  • Create New...