Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
  • Replies 269
  • Created
  • Last Reply

Top Posters In This Topic

nope it doesn't read knock sensor values, the consult port does not make them available.

Otherwise it is great, we started my engine for the first time after the rebuild today, and it was great having the display to make sure everything is OK

all 5 wires are needed to get everything to work. There is not one wire which it needs to get the ignition timing.

I have *heard* that connecting up your own consult port works with the CA18 ecu (consult is supported, but Nissan never hooked it up). I haven't seen this with my own eyes so i dont know how true it is.

Impakt

I have spent the last hour researching it and am having trouble finding wheather the ecu has the Tx Rx and clk. The only ecu diagrams I have don't have them listed.

I have also heard of a guy with a datto 1600 running a ca18det who has hooked up a consult port

not really much, just some guy told me the supposed tx, rx, and clk pinout from the ecu, I dont want to post it up untill I have evidence that its correct or Ive tested it incase it frazzles ecus.

  • 2 weeks later...

i ve had my screen a couple of days and it is awesome already found a couple of problems that were easily fixed and have probably saved me the cost of the screen.

However i cant seem to get the software to work I am using a USB to serial converter which seems to be working (getting Rx lights flashing) but software wont connect.

Interesting, we had the same problem with a serial to USB converter....but a second model worked fine?

I had some problems, it'd create a virtual serial port 3 and it wa a no go, but if i disable the REAL serial port 2 and force the virtual to serial port 2 THEN it worked. Go figure?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So yes. All of them. Something like 98% of all fuel in the USA has 10% ethanol: https://afdc.energy.gov/fuels/ethanol-fuel-basics It's labelled as like, AKI, 87, 91, 93 with an E10 or E5 or E15 label on the pump. At a certain point, it's not just "E10" instead of 91. It is 91, 95, 98, and all of them have 10% Ethanol in them. You can also get E85 and E30 which is why you do see some people rolling around with E30 tunes in them.
    • Thanks for the response. This is an 04 EP3 Type R. JDM spec. Fairly certain they're just basic BC racing coils. I do plan to keep as the ride quality on stock I've been told is pretty meh given Sydney roads. If I were to go down that avenue, does NSW require them to be a certain spec (close to original) etc?
    • Should have asked what is the car?
    • I've had two super conflicting experiences with blue slips. My 30 year old E39 waltzed through with no issues but my brother in law was knocked back on 12 y/o 3 series due to wiper blades and some cracking in a control arm bush.  What kind of coil overs? Do you want to keep them after?  If it was me I'd get some dirt cheap shocks and springs from eBay or scumtree. Not ideal but will get you over the line and might even be less than $1k.
    • Hey guys,  Way back when (about 15yrs plus), I picked up a beautiful set of Tein 'Super Racing Spec Circuit Master RE' coilovers from Russman. I have legit never fitted them to my car, as it was garaged indefinitely while i bought a house Yada Yada. They look brand new! Anyway its time to pick up where I left off, and have started doing some khanacross and am booked in for a hill climb next month. The car has some hard af Nismo shocks in ATM, which has me wanting to upgrade again, and now I am left wondering if it's worth having these teins rebuilt? I think they where an ok shock back then, but how do they compare to what's on the market now?  Shockworks/mca are 2800+, and I am sure they are great. But if I can have these rebuilt and be better than, say, a set of bc's for around the cost of bc's, I would be happy with the performance v cost trade off.  If they are considered outdated and rubbish these days, so be it, I'll put them on the shelf and be happy to look at the pretty green colour while I save for the SW/MCA option. Grateful for your thoughts on the matter, and suggestions on who could do the rebuild if it's a worthwhile pursuit.  cheers, Rowdy. 
×
×
  • Create New...