Jump to content
SAU Community

Recommended Posts

Hey everyone, after years of building and rebuilding my gtr I thought I would finally start a build thread as its currently under another transformation with bc automotive for world time attack open class in October. I've read and followed many threads over the years and thought I'd contribute something back as I have always enjoyed other people's build journeys. So I'll start with a couple photos of photos in its early days as I didn't have any clearer shots on file.

post-19978-0-32990000-1370079082_thumb.jpg

So from standard road car 7 years ago running 270rwkw,power fc, n1 turbos from memory back then, I decided to take it off the road and use it as a dedicated track car. So in went a cage, seats, fire bomb for safety. Back then I had originally wanted to do targa and club sprint days, also thought I would leave it as it was too...yeah that didn't happen.

Photo was at Calder park

post-19978-0-90157600-1370083134_thumb.jpg

Edited by stevena

This photo was taken bout 2 years ago at the front of Bc Automotive and Marine. I had work performed from other workshops over the years, some good, others not so good. I was looking to take this car to a new level of lap times at Phillip Island, my sole goal was to achieve Porsche gt3 cup car lap times. My mate has one and I wanted to beat those times wether I was driving or someone else, as long as it was quicker than his Porsche. Back then they were running around 1.36's at the island. I was told from other workshops that these times weren't possible, even if you had a 3lt, completely stripped car. So hence the move to Bc automotive we're they believed it can be done.

post-19978-0-64256800-1370083597_thumb.jpg

I had a 2.8lt hks engine thrown in, garrett twin turbo set up, standard head except camshafts. And minus the rag thrown in lol. Had dean Lillie from Bc automotive tune it up, 376kw on standard pump fuel, also had it tuned on 109 fuel and it made 419kw at the rears on 22psi I believe, might have to confirm that. Then we hit the island for a shake down, this was march 2012.

post-19978-0-14672500-1370084745_thumb.jpg

Best time achieved was 1.43.3 with dean lillie at the wheel, my times were way to slow to mention. That was running on used 265 Pirelli slicks I bought second hand, 376rwkw with a ppg dogbox with motec shift cut, motec m800 logging and sensors everywhere to see what was happening, and dean and Brett had also installed an adjustable front sway bar in cabin, left of the gear knob. Feedback from Deano was that the car was hard to drive, very snappy and needed some suspension tuning. So back to the workshop again, it had been a year till the next track on march 6th 2013 on Gareth events...

Needed to make it lighter, needed more rear grip, 305 slicks ordered, once again used as I don't have a large budget, needed new te37's, ordered 18x10.5 instead of the 18x9.5 I had..thanks to import monster on the great deal. Some work went into the suspension to make these wheels fit under the standard guards, harder spring rates. Needed aero big time, Brett and dean made up some ply wood front diffuser for testing(worked awesome), aeromotions dynamic wing to balance the front diffuser with a carbon rear boot, I'm obsessed with aero and weight. Carbon lights made up. The car was weighing in at 1320kg with little fuel and no driver. The guys worked hard and smart, only advising me to Spend cash on what was needed even though i didn't listen at times. Back to the island we went to try and get a 1.36. Oh yeah, we tuned it up on E85 fuel making 471rwkw on 26 pound boost

post-19978-0-52405500-1370086619_thumb.jpg

post-19978-0-69445900-1370086622_thumb.jpg

post-19978-0-07592500-1370086858_thumb.jpg

post-19978-0-28515600-1370086995_thumb.jpg

post-19978-0-76501000-1370087883_thumb.jpg

post-19978-0-53878200-1370089316_thumb.jpg

Edited by stevena

It's only just begun, world time attack open class confirmed, BC Automotive once again are tearing it up( literally) to get it ready for October. New engine/ weight loss/rewire/more aero and completion date is July 07th. I'll post all the goodies shortly.

That last track day was cut short as we only had 4 laps, first 2 laps we had a misfire due to spark plugs. We decided to turn the boost down as it was a test day to make sure everything else was working well. Back out for the second session problem sorted with plugs but coming onto the main straight we blew a turbo and cut the day short. The motec data was showing the car came on to the main straight 10km faster than its previous lap, tyres were still getting heat into them so not sure what times would have been achieved. 1.34 possible with more track time? So back to Bc automotive for a chat on what to do next.

This is when the decision to see what the car could do in its full potential, that meant new engine turbo package, and most importantly it has to be reliable. Motec data also showed oil surge in 2 corners at the island, dry sump set up a must for us, Data showed our front diff was reaching 120deg after 2 laps so decision for another cooler to be added. And a rewire to keep things simple all within a budget. Heaps of work required and thankfully for all our sponsors stepping up and helping where they can as without them this project wouldn't be the same, especially Brett and Dean working after work hours and where ever possible to make this project happen.

So out with the old 2.8hks engine

post-19978-0-64816400-1370134082_thumb.jpg

Single set up, precision turbo was decided on. Our previous twin garrett set up would be on full swing by 5300rpm which still did the job but if we could get something to be on full swing under 5000 that would be ideal and precision swear it will be. Soon see.

post-19978-0-36300700-1370134508_thumb.jpg

Decided to use a new 2.8 stroker, we wanted something proven and with local support and and Nitto is the go, big thanks to Andrew from Nitto performance engineering, and shipping it over quickly as we are under a time management program.

Big thanks to Ross for supplying the Ross balancer, photo of a photo attached as both the Nitto package and balancer were sent straight to our engine builder and I didn't get a chance for a quick snap shot.

post-19978-0-76726300-1370135891_thumb.jpg

New n1 block sent to our engine builder stew from cavehill engine services for the build. In need of 450-500rwkw to keep up with the pointy end of time attack cars. Need it to rev high as well, no higher than 9000rpm to keep it safe.

post-19978-0-98142200-1370136264_thumb.jpg

Car needs to be lightened and rewire, we were heavy at 1320. Open class allows us to be 1190kg, this can be achieved but at a high cost. I'm sure in the future it will be closer to this weight but when funds are available. So a more realistic goal would be 1250-1270. So Bc started stripping the car, using only what's needed. Photo of Brett ripping wires out.

post-19978-0-34081400-1370138032_thumb.jpg

post-19978-0-51232600-1370138075_thumb.jpg

post-19978-0-00204000-1370138113_thumb.jpg

While the engine is put together Bc sent the car to Leigh Walker from Pro Race Developments for some additional strength in the front engine bay, there was evidence of flex, so few more Chro Molly bars will fix that issue. Won't need a strut brace now. Big thanks to Leigh for the super turn around time.

post-19978-0-51581500-1370138883_thumb.jpg

post-19978-0-09282100-1370138896_thumb.jpg

post-19978-0-64386500-1370138908_thumb.jpg

Ripped out heaps more weight. Bye bye abs, accumulator, wires dash etc etc. dash weighed 10kg, wiring loom in engine bay and cabin 18kg, probably 2-5kg in boot but hadn't weighed that. Inner quarter panels bout 2kg, all the old computers in car and brackets and bits here and there another 15kg.

post-19978-0-15405400-1370139131_thumb.jpg

post-19978-0-45642000-1370139302_thumb.jpg

post-19978-0-13376700-1370139336_thumb.jpg

Ha ha ha - awesome acrobatics.

Could not believe the mess of excess wiring behind my 32's dash. Fill a large cardboard box to hold it all.

Lol huge mess, there really is to much that can go wrong so a rewire to simplify things had to happen.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...