Jump to content
SAU Community

One Very Slow Build

goldwire
 Share

Recommended Posts

goldwire Rookie

goldwire

Posted
Posted

So this is my r32, I've have had it for four years, not a huge amount of progress had been made, this probably has a lot to do with it being stored 300km away from where I live.

Anyway I'd best start from the beginning, I bought this R32 sedan off a guy from my uni, as a very tidy street car (in hindsight i wish I didn't) Originally it was an rb20de manual which has since been fitted with an Rb20det.

009-2.jpg

003-2.jpg

First thing and something that annoyed me was the towbar, so that got removed pretty quickly.

001-2.jpg

Bumper support had a small bit of rust on it so I tidied that up while I was there.

002.jpg

005-2.jpg

008.jpg

Still more to come.....

Link to comment
https://www.sau.com.au/forums/topic/426343-one-very-slow-build/
Share on other sites
goldwire Rookie

goldwire

Posted
  • Author
Posted (edited)

Since the car came with a GTR grille and bonnet, I thought I may as well get the bumper too. Needed to get the angle grinder onto the bumper support to get it to fit.

064.jpg

065.jpg

019.jpg

022.jpg

I did a few drift days and decided it needed a bit more grunt and some changes to the handling. This took longer than I expected. it sat in the shed for about two years before I decided to attack it. I've decided that this will be a full time track car as it's just going to be too hard to get any drift spec knuckles legal. The next set of posts are of work carried out within the last 10 months.

Edited by goldwire
  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      What brakes on R34 GTT(Europe)

      By Dose Pipe Sutututu · Posted

      Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...