Jump to content
SAU Community

Recommended Posts

hi there, i own "00 stagea rs4 with the rb25 neo 6 turbo motor and have blown the turbo seals and pretty sure the bearings are on their way out too.

im just wondering if i should;

A- get it reconditioned and high flowed

B- buy a bigger better turbo

or C- buy second hand standard from a wreckers.

any help will be appreciated, sorry if this has already been discussed but i am just getting my head around the forum,

cheers

Link to comment
https://www.sau.com.au/forums/topic/426577-stagea-turbo-upgrade/
Share on other sites

A - did you search?

B - do you have $5,000 to upgrade the turbo?

C - now that you are confused about B you may want to A.

I know that helps.

Welcome to SAU.

Nailed it! And yes Welcome!

Nailed it! And yes Welcome!

yea cheers guys. i have searched $960 for a high flow from hyper gear $1,900 for garrett spec $500 second hand standard. anybody had experience with this?

forums are for help so i thought i'd try... should probs simplify it for you little boys next time

yea cheers guys. i have searched $960 for a high flow from hyper gear $1,900 for garrett spec $500 second hand standard. anybody had experience with this?

forums are for help so i thought i'd try... should probs simplify it for you little boys next time

Little boys? :blink:

Maybe you should try elaborate rather than simplify so we know what you are trying to achieve ;)

Little boys? :blink:

Maybe you should try elaborate rather than simplify so we know what you are trying to achieve ;)

blown turbo. need a fix or replacement. what do you fellow nissan owners know about this? what is more reliable? what is the best opyion for a sub $1000 budget

blown turbo. need a fix or replacement. what do you fellow nissan owners know about this? what is more reliable? what is the best opyion for a sub $1000 budget

Right there is your problem! Turbo will generally require a tune so if your budget is $1000 get a stock one or similar!

No idea what supporting mods you have so that is what i would suggest!

motor is completely standardm mods later when i dont have to hide the turbo

You can hide majority of the low mounted turbos including the bigger ones (3076 etc).... Plenty of options but at this stage it sounds like your budget is not there! Cheap replacement will do until you can find the time/money to do it all properly!

yea cheers guys. i have searched $960 for a high flow from hyper gear $1,900 for garrett spec $500 second hand standard. anybody had experience with this?

forums are for help so i thought i'd try... should probs simplify it for you little boys next time

You cannot put a non standard turbo on the car without tuning it. To do this means you will also need a computer that is tunable, and you will need it tuned on a dyno.

The cheapest possible outcome OTHER THAN replacing your stock turbo with another stock one would be to highflow your turbo, and to Nistune your ECU. The highflow will cost $960, a Nistune is about $1,000 at minimum supplied fitted and tuned. So it will cost you a bare minimum of $1,960 provided you can remove and install the new turbo yourself.

You are right though, forums are for help. We have helped thousands of people before you asking the simplest of all questions. A five second search would have told you what I said above, and it would have done a little bit of respect to the people who have spent the last decade building this forum to be the knowledge base that it is. You can understand why you will get shut down if you ask a question almost EVERYONE has asked before. You should also accept that we will school new users on what is expected of them on this forum, so you can learn to actually get some value from it rather than being spoon fed.

Furthermore, once you decide to spend the other $3,000 I mentioned in my first post on a proper intercooler, exhaust, fuel pump, boost controller, induction pipe, AFM and injectors you will also need another tune valued at a MINIMUM of $600. Also,if you are a little girl and cannot do the work yourself you should budget a couple of grand extra for labour on top of the above.

But of course, car forums are typically aimed at grown men - and little girls should stick to being bent over by mechanics.

I hope this was an eye opener for you, the forum needs more intelligent people to gain ranks and contribute, and less freeloaders just here to take a piss on everyones efforts.

  • Like 1

You cannot put a non standard turbo on the car without tuning it. To do this means you will also need a computer that is tunable, and you will need it tuned on a dyno.

The cheapest possible outcome OTHER THAN replacing your stock turbo with another stock one would be to highflow your turbo, and to Nistune your ECU. The highflow will cost $960, a Nistune is about $1,000 at minimum supplied fitted and tuned. So it will cost you a bare minimum of $1,960 provided you can remove and install the new turbo yourself.

You are right though, forums are for help. We have helped thousands of people before you asking the simplest of all questions. A five second search would have told you what I said above, and it would have done a little bit of respect to the people who have spent the last decade building this forum to be the knowledge base that it is. You can understand why you will get shut down if you ask a question almost EVERYONE has asked before. You should also accept that we will school new users on what is expected of them on this forum, so you can learn to actually get some value from it rather than being spoon fed.

Furthermore, once you decide to spend the other $3,000 I mentioned in my first post on a proper intercooler, exhaust, fuel pump, boost controller, induction pipe, AFM and injectors you will also need another tune valued at a MINIMUM of $600. Also,if you are a little girl and cannot do the work yourself you should budget a couple of grand extra for labour on top of the above.

But of course, car forums are typically aimed at grown men - and little girls should stick to being bent over by mechanics.

I hope this was an eye opener for you, the forum needs more intelligent people to gain ranks and contribute, and less freeloaders just here to take a piss on everyones efforts.

thank you for that. i have the turbo off the car and putting a new one on will be no problem so dont worry i wont be taking anything from behind (although i am a first year). i guess i'll go standard and just start saving for all the supporting mods before i go bigger and just go all out later down the track. i also just want to say that i understand this is not where to ask what to buy but it's can't be bad to ask opinions on different options and hear from more experienced people like yourself and others rather than trial by error where it's not needed.

thankyou again :)

thank you for that. i have the turbo off the car and putting a new one on will be no problem so dont worry i wont be taking anything from behind (although i am a first year). i guess i'll go standard and just start saving for all the supporting mods before i go bigger and just go all out later down the track. i also just want to say that i understand this is not where to ask what to buy but it's can't be bad to ask opinions on different options and hear from more experienced people like yourself and others rather than trial by error where it's not needed.

thankyou again :)

Yep fair call... As a first year its a good car to start with and you will learn HEAPS by reading through build threads and also suss out the DIY section too! Heaps of useful stuff!

thank you for that. i have the turbo off the car and putting a new one on will be no problem so dont worry i wont be taking anything from behind (although i am a first year). i guess i'll go standard and just start saving for all the supporting mods before i go bigger and just go all out later down the track. i also just want to say that i understand this is not where to ask what to buy but it's can't be bad to ask opinions on different options and hear from more experienced people like yourself and others rather than trial by error where it's not needed.

thankyou again :)

All good. I like your attitude a LOT better in this post!

A tip: the best thing to do is to search first and read what has been said, usually you will work out what you want to know. If you find a thread that is mostly relevant to your question BUT doesn't answer all your questions, you should ask your question in there. The reason for this is so that future users will be able to find answers easier, rather than having to search across a multitude of threads. Of course, if you can't find anything of relevance you should then start your own thread.

FYI the motor in your Series 2 Stagea is the same as what is found in an R34 GT-T (RB25DET NEO), so you will be able to use technical threads on that motor also.

If you have any questions feel free to drop a PM, I am happy to help.

  • Like 2

All good. I like your attitude a LOT better in this post!

A tip: the best thing to do is to search first and read what has been said, usually you will work out what you want to know. If you find a thread that is mostly relevant to your question BUT doesn't answer all your questions, you should ask your question in there. The reason for this is so that future users will be able to find answers easier, rather than having to search across a multitude of threads. Of course, if you can't find anything of relevance you should then start your own thread.

FYI the motor in your Series 2 Stagea is the same as what is found in an R34 GT-T (RB25DET NEO), so you will be able to use technical threads on that motor also.

If you have any questions feel free to drop a PM, I am happy to help.

This sort of thing is what makes SAU the best to be on :yes:

  • Like 1

All good. I like your attitude a LOT better in this post!

A tip: the best thing to do is to search first and read what has been said, usually you will work out what you want to know. If you find a thread that is mostly relevant to your question BUT doesn't answer all your questions, you should ask your question in there. The reason for this is so that future users will be able to find answers easier, rather than having to search across a multitude of threads. Of course, if you can't find anything of relevance you should then start your own thread.

FYI the motor in your Series 2 Stagea is the same as what is found in an R34 GT-T (RB25DET NEO), so you will be able to use technical threads on that motor also.

If you have any questions feel free to drop a PM, I am happy to help.

look like i gotta do some exploring around this forum and some wreckers haha. thanks i wasnt sure what model my stagea was built around, i had people telling me the 33 gtr.

i'll send you a message if i get stuck or need some pointers and will post a thread when i get my car back on the road (i only got to drive it twice after buying it before the turbo died)

thanks again and thanks to everyone else who replied.

see how i go haha :)

Don't forget to use all new gaskets either will you. If you do decide to do a hypergear hiflow and put it on your standard rb25 neo DO NOT RUN MORE THAN FACTORY BOOST mate. Stock replacement should be find to 9-10 psi without hitting R&R. Also good to hear your going to do plenty of hours of reading on the forum. There is 10 plus years of good info in and around this forum :)

So anything you your stuck with odds are its been covered as GTScotT has mentioned.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...