Jump to content
SAU Community

Recommended Posts

Why? Not trying to be cheeky but we already had a Drag Combat report in 'the LINE' this week. These figures going somewhere or is it just for the forum?

12.648 @ 108.51 MPH, 1.851 60'

11.989 @ 116.03 MPH, 1.694 60'

12.174 @ 116.98 MPH, 1.884 60'

12.179 @ 116.82 MPH, 1.869 60'

12.287 @ 114.63 MPH, 1.958 60'

Adrian

:)

Andrew,

If you would like me to write the article i will give it a shot. In the past i have written a couple of articles for Hot4s etc. I was there, so i have a fair idea of what went on, i left early though, before i froze to death. I'll need times, highlights etc and i will do the rest. PM me if you are interested.

Rhys

Some really good times there guys.

But........

:D

HOW COME - the speeds are still in MPH - I don't need to convert back again, I'm to old to cope with MPH again, it took me 30 years to get used to KPH!

New dragstrip - should have installed some new timing equipment rather than recycling the gear from Castlereagh.

Guest two.06l

1st: 13.674 @ 114.53mph , 1.786 60'

2nd: 14.087 @ 89.48mph , 1.867 60'

3rd: no time as timing failure (my best ever run)

4th: 12.101 @ 118.94mph , 1.799 60'

5th: 13.715 @ 110.21mph , 1.856 60'

6th: 12.626 @ 113.12mph , 1.827 60'

7th: 12.411 @ 101.71mph , 1.921 60'

yeah bonkers that bloody timing gear cost me my first 11sec pass.ah well it will come to me soon!!!!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • oh they were with that motor, you need to remove the engine to change the spark plugs (don't have to, but it does make it easier)
    • I certainly fall into the annoyed camp, but glad to hear that if it's happening at low boost then I'm not likely going to blow a turbo and end up with metal shards in my oil. Just feels like it prevents me from really driving it without hesitation and "peak" performance. Wonder if it's the VCAM, it did an impressive job of shifting the torque curve and faster spool, but maybe now it's "too fast" and there's too much air for how open the throttle is.  Based on some other threads, will also do some reading on synchronizing the actuators. They are the default actuators that come on the Garrett's and I would think they would be set the same coming from the factory, but if the turbos don't actually work exactly the same way at the same time as previously mentioned, it would be worth making sure the actuators are actuating together properly
    • I went down this rabbit hole before, ended up sourcing a motor from the UK (I'm in Japan) which also didn't function correctly. With the original motor, I disassembled it and reassembled it and it works somewhat, sometimes. What I could deduce from all my screwing around is that there is calibration of the gears on the inside of the motor and two ramps on the main gear which activate switches that operate the motor and move the sunroof either to retract into the roof or tilt. Where I got stuck was that, it seemed in my case that one or both of the switches that are activated by the ramp on the gear did not always activate and thus the motor did not move, causing it to sometimes not retract or tilt (apologies, I've forgotten which way it didn't work.).  Of course this part is discontinued at Nissan now, it's the same part in the S15 but no other models. I also contacted the manufacturer of the component for schematics - forgot the name, they're based in Gifu - but they declined to share the information due to being bound by an NDA, sadly. Looking through my pictures now, it seems I last had a crack at this in 2022. See, I so kindly wrote "open" and "close" next to the switches. If you figure it out, please do tell me. Those little switches, with the red buttons may need to be replaced.
    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
×
×
  • Create New...