Jump to content
SAU Community

Recommended Posts

Hi Folks,

Now that I've sold my GTR some time ago, I've got some stuff in the garage that is unwanted.

1; Standard R33/R34 GTR suspension - in good condition great for passing RWC and such. Asking $150 ONO.

2; Standard R33 GTR Cat-back exhaust including compliance spec cat converter - good condition also no holes and such - Again, great for passing RWC and such. Asking $150 ONO.

3; Cusco suspension tops to suit R33/34 Skylines - bought it with intention of purchasing fancy coilovers a while back. Asking $100 ONO.

4; Brand new pair front ball joint for R33 (and maybe R34) GTR - not needed at all. Asking $100 ONO.

5; Standard RB26 440cc injectors - was given when I bought the car. Asking $150 ONO.

6; Standard R33 GTR ECU - Again, was given when I bought the car. Asking $150 ONO.

7; 'Pull to Push conversion kit' for 32/33 Skylines - Standard items that are needed to convert from pull to push type of clutch (aka poor man's OS Giken pull to push conversion kit) Will get photos to show what you get. Asking $100 ONO.

Pictures are to come, I'm negotiable with prices, can do 'bundle' if asked as I'd like to clear the garage.

I'm located eastern suburbs of Melbourne, can post many items at your cost. As for suspension/exhaust, I'd rather pick up unless it's being organised by you.

Contact me via PM or SMS me on 0498 650 167.

Thanks

Grant

Link to comment
https://www.sau.com.au/forums/topic/426767-grants-carless-garage-sale/
Share on other sites

Folks,

Picture time!

Standard coilovers

2013-06-11173448_zpsc0c691e0.jpg

Standard cat-back

2013-06-11173513_zpsb87b0485.jpg

2013-06-11173540_zps6e7f4dbd.jpg

2013-06-11173556_zpsc36486ab.jpg

Cusco tops

2013-06-11173742_zps1e33365d.jpg

IMG_0130_zpsb7ca3a3d.jpg

Ball joints

2013-06-11174209_zps9aacc0e9.jpg

Injectors

2013-06-11173636_zpse3e7c1e7.jpg

Stock ECU

2013-06-11173614_zps42ea1e79.jpg

Pull to push snout

2013-06-11173928_zps001d2c16.jpg

Also have few other bits I've got to sell

Standard BNR34 radiator - $20

2013-06-11173459_zpsdea13f2b.jpg

Standard R33 GTR Strut brace - $50

2013-06-11173509_zpsc084772e.jpg

Exhaust silencer to suit HKS Hi-Power (and Silent as well) - $50

2013-06-11173651_zpsec25a190.jpg

IMG_0234.jpg

Bosch 044 fuel pump, in working condition prior to removal - $150

2013-06-11173842_zpsaac9ec30.jpg

2013-06-11173859_zpsafa48173.jpg

Thats it from me for now, as usual I'll entertain offers as I'd like to clear out the garage. PM/SMS if you want to grab these bits.

Cheerio

Grant

BUMP!

Want them? Do feel free to make offer on the bits you want!

I need them gone obviously!

Cheerio

Grant

Pull/Push converter is SOLD!

Everything else still available, as usual will entertain offers. Help me clear the garage!

Cheerio

Grant

Folks,

Time for price adjustment!

1; Standard R33/R34 GTR suspension - in good condition great for passing RWC and such. Asking $130 ONO.

2; Standard R33 GTR Cat-back exhaust including compliance spec cat converter - good condition also no holes and such - Again, great for passing RWC and such. Asking $130 ONO.

3; Cusco suspension tops to suit R33/34 Skylines - bought it with intention of purchasing fancy coilovers a while back. Asking $80 ONO.

4; Brand new pair front ball joint for R33 (and maybe R34) GTR - not needed at all. Asking $80 ONO.

5; Standard RB26 440cc injectors - was given when I bought the car. Asking $130 ONO.

6; Standard R33 GTR ECU - Again, was given when I bought the car. Asking $130 ONO.

Standard BNR34 radiator - $15

Standard R33 GTR Strut brace - $40

Exhaust silencer to suit HKS Hi-Power (and Silent as well) - $40

Bosch 044 fuel pump, in working condition prior to removal - $130

Once again, as usual will entertain offers. So do feel free to make an offer.

Cheerio

Grant

Hi folks,

R33/34 GTR suspension and R34 GTR radiator is SOLD!

Everything else still available, best to SMS (0498 650 167) me as of tomorrow, I won't be around but I can organise pickup of some sort (will take some time so bear with me - will be in W.A. for some time).

Thanks

Grant

  • 2 weeks later...

Gbanger ill throw you a hundered for the ecu

Momo, PM sent.

Hey grant,

I'll grab that strut brace from you...I'm in the northern suburbs bro. Will msg you to organise it.

Cheers...

Will wait for your SMS.

Stock cat-back incl cat is SOLD and collected just then.

Stock ECU is on hold.

Here is what's left;

Brand new pair front ball joint for R33 (and maybe R34) GTR - not needed at all. Asking $80 ONO.

Standard R33 GTR Strut brace - $40

Exhaust silencer to suit HKS Hi-Power (and Silent as well) - $40

Bosch 044 fuel pump, in working condition prior to removal - $130

As usual, will entertain offers.

Cheers

Grant

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...