Jump to content
SAU Community

Help With Turbo Supporting Mods

johnny_boi85
 Share

Recommended Posts

johnny_boi85 Contributor

johnny_boi85

Posted
Posted (edited)

Hi guy im looking at upgrading the turbo on my stock (beside Exshurst) r32 rb20det. Can you please give me a list on what supporting mods i should be looking at buying at the same time. I dont want to buy things i dont need at the moment just anything the motor and turbo will need to function easly eg (intercooler, injectors). Ive been looking at t3/t4 turbos with a high mount manifold. any help would be great thanks.

p.s. i dont know to much tech talk to please keep it simple

Edited by johnny_boi85
Link to comment
https://www.sau.com.au/forums/topic/427124-help-with-turbo-supporting-mods/
Share on other sites
Plattsy Grand Master

Plattsy

Posted
Posted

go watch mighty car mods on youtube. itll be easier than the grief our gonna get on here from all the smart arses.

simply!?

rb25 turbo (highflowed)

braid oil and water lines for turbo.

injectors. 550cc lowest.

full 2.5 inch to 3inch turbo back exhaust.

front mount.

fuel pump.

aftermarket ecu or nistune.

gaskets studs etc etc. lots of kesh. and a tuner.

wolverine Grand Master

wolverine

Posted
Posted

ve been looking at t3/t4 turbos with a high mount manifold.

------------------------------------------------------------------------------------------

Sometimes Ebay is your friend and sometimes it isn't. This is an example of ISN'T.

Definitely good advice to look at a quality hiflowed turbo if you are looking to keep costs down and visibility low.

ARTZ Grand Master

ARTZ

Posted
Posted

go watch mighty car mods on youtube. itll be easier than the grief our gonna get on here from all the smart arses.

simply!?

rb25 turbo (highflowed)

braid oil and water lines for turbo.

injectors. 550cc lowest.

full 2.5 inch to 3inch turbo back exhaust.

front mount.

fuel pump.

aftermarket ecu or nistune.

gaskets studs etc etc. lots of kesh. and a tuner.

yer!!

like anyone is going to take advice from a commodore driver...

ARTZ Grand Master

ARTZ

Posted
Posted

farking rain mate. i couldnt even keep up with you last night. i was fish tailing in 4th.

So was I ;)

I went to overtake someone in 5th and the rear end kicked out...had to change my daks when i got home...

really need to stick a quarter tonne weight in the back i think :/

Plattsy Grand Master

Plattsy

Posted
Posted

So was I ;)

I went to overtake someone in 5th and the rear end kicked out...had to change my daks when i got home...

really need to stick a quarter tonne weight in the back i think :/

yea yours will be bad with no weight on it!

Old Booster Enthusiast

Old Booster

Posted
Posted

Hi guy im looking at upgrading the turbo on my stock (beside Exshurst) r32 rb20det. Can you please give me a list on what supporting mods i should be looking at buying at the same time. I dont want to buy things i dont need at the moment just anything the motor and turbo will need to function easly eg (intercooler, injectors). Ive been looking at t3/t4 turbos with a high mount manifold. any help would be great thanks.

p.s. i dont know to much tech talk to please keep it simple

How about reading the sticky at the top of the page "Rb20 Turbo Upgrade, All Dyno Results"

take the 3 hours and read it from start to finish, walk away enlightened!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • oHBoy.
      Starter motor replacment teeth count.

      By oHBoy. · Posted

      Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • niZmO_Man
      J50 clock date suddenly reset to January 1

      By niZmO_Man · Posted

      Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • niZmO_Man
      Wheel Sizes & Offsets For Skylines

      By niZmO_Man · Posted

      8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...