Jump to content
SAU Community

Recommended Posts

Your kidding right.......please put down the crack pipe, now when you sober up you need to realise that power gains in a Na motor are all about head work, and I hope you have deep pockets to pull power out of a 20de

Would love to turbo it being a gtst with an na motor in it but sadly still on ps, the car goes alright pulls hard on other na rb20s and even 25s bit confused about why people think they are that bad, just lacks a bit of bottom end needs clutch kick to get going power comes at 4.5krpm is there anything I can do for bit of bottom end power

Lol didn't think a question would hurt so much, now if it Doesn't hurt to ask what head work would be good I'm not expecting too much out of it just looking for a little more power

It's hurting because the question is just.....so......retarted it's hard to even read, an AFM simply reads and tells the ecu how much air is flowing into the engine, hence the name air flow meter, your question lines up the same as if you asked us if you put a new water temp gauge in would it reduce your water temp.....

Now to increase power in an NA there is a whole dedicated thread on it, and no I don't think you will ever hit power figures that will require an AFM change.

Dude, seriously. What do you think you will gain from putting an aftermarket AIR FLOW METER, a METER!! on youre n/a. Far out, I cannot understand or imagine how your brain must function

Z32 AFM is a standard Nissan item....they come from the z32 300zx

There is so much hatred for Na's I dident think the afm was a good idea just going by what people are telling me an thought I would ask first, all that needed to be said was a simple no,instead all I get is people being a smart arse about it and tell me to turbo it and ask if im on drugs,if I wasent a

PPlater believe me I would not go near a pos na

Whoever told you a z32 is an upgrade for a 20de needs to stop giving advise because they are stupid, and AFM upgrade is only needed when you have exceeded the current AFM's ability to read the amount of air going into the engine. Don't waste your money increasing power in the 20de because it would be so minor you wouldn't even notice a difference until you spent over 2 or 3 THOUSAND dollars.

For example : extractors and exhaust, properly setup cold air intake, coolant bypasses, bigger throttle body.... All those will cost you about $500 all up and you won't even notice a difference, will just sound different, to get better power you will need head porting and polishing, head shaving, oversize valves, cams, cam gears and then a tune, and thats just a few of the things needed and all up will cost around $3000.

Don't waste your money, build a spastic turbo motor over your p-plate years and have fun when you can drop a real engine in.

There is so much hatred for Na's I dident think the afm was a good idea just going by what people are telling me an thought I would ask first, all that needed to be said was a simple no,instead all I get is people being a smart arse about it and tell me to turbo it and ask if im on drugs,if I wasent a

PPlater believe me I would not go near a pos na

There is no hatred for N/A's. There is hatred for stupid questions. You need to stop listening to those people. The best way to get more power out of an engine is through forced induction, hence the turbo suggestion.

What I suggest you do is spend money on maintaining you car, forget about gaining more power. You can put a pod filter on your car and you gain 0 kW, but get pulled over and defected. What's the point? You're a P-plater in a Skyline. Keep the car as is, service it regularly, fix tyres, brakes, suspension, etc. Once you're off the P's, put a turbo motor in. All the money you saved from not buying extractors, exhaust, pod filter, Z32 AFM, ECU and tune you can easily go and buy a good RB25DET.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...