Jump to content
SAU Community

Recommended Posts

Guest Robo's

Well finally did it at Calder tonight with my stock turboed R33 GTST running street tyred Sumituno's HRZ'2's with a [email protected] with a 2.02 60 foot. I was completely wrapped.

First run saw a PB of [email protected] with a 2.09 60'foot. Next run was surely a 12 second run with a 1.97 60' foot but missed 3rd gear and coasted to a 13.6. Then the final run of the night saw the above result [email protected].

All this result with the standard turbo running 13psi, still using the trusty SAFC, FMIC, Full 3 inch exhaust, Boxed up Pod, and cam gears.

Got to be happy with that :rofl:

Link to comment
https://www.sau.com.au/forums/topic/42767-r33-into-the-12s/
Share on other sites

  • Replies 123
  • Created
  • Last Reply

Top Posters In This Topic

Well finally did it at Calder tonight with my stock turboed R33 GTST running street tyred Sumituno's HRZ'2's with a [email protected] with a 2.02 60 foot.  I was completely wrapped.

First run saw a PB of [email protected] with a 2.09 60'foot.  Next run was surely a 12 second run with a 1.97 60' foot but missed 3rd gear and coasted to a 13.6.  Then the final run of the night saw the above result [email protected].

All this result with the standard turbo running 13psi, still using the trusty SAFC, FMIC, Full 3 inch exhaust, Boxed up Pod, and cam gears.

Got to be happy with that :rofl:

Good Job! Best I could get out of my stock turboed RB25 was a 13.8 @ 104 with a 2.1 60ft. Of course my RB25 is in an S13 body so I should be a little quicker. I am running stock IC, stock ECU with no fuel correction and 3" exhaust. Looks like cam gears and SAFC should be on my list of future mods.

Link to comment
https://www.sau.com.au/forums/topic/42767-r33-into-the-12s/#findComment-873475
Share on other sites

great effort robbo it means a 12 is not far away for me either had a similar mph with less power than now.

calder seem to have made the surface much better for launching heard of some great times last night dr-drifts ca datto 1600 ran 12.003 @ 113 mph on street tyres and he did a 1.7 60'. also a gtr did 11.6 @ 120 mph.

meggala

Link to comment
https://www.sau.com.au/forums/topic/42767-r33-into-the-12s/#findComment-873518
Share on other sites

Awesome! Congratulations, thats very impressive without heaps of mods. In NZ the quickest R33s are barely touching into the 13s :rofl:

I'm just a n00b here, but I have been quietly tracking your progress and soaking info, because I have been building up parts for my R33 - and your car for a while had very similar to the mods I decided to do for my "first stage" (cold air intake, cat back exhaust, and S-AFC2) and read quite a few posts re: your car and S-AFC tuning which looked very positive for the direction I was heading.

What clutch are you running?

Link to comment
https://www.sau.com.au/forums/topic/42767-r33-into-the-12s/#findComment-873545
Share on other sites

Guest Robo's
Awesome!  Congratulations, thats very impressive without heaps of mods.  In NZ the quickest R33s are barely touching into the 13s :rofl:

I'm just a n00b here, but I have been quietly tracking your progress and soaking info, because I have been building up parts for my R33 - and your car for a while had very similar to the mods I decided to do for my "first stage" (cold air intake, cat back exhaust, and S-AFC2) and read quite a few posts re: your car and S-AFC tuning which looked very positive for the direction I was heading.    

What clutch are you running?

Running the Extreme Daikin Heavy duty. Its been in for nearly a year now with about 20 runs down the strip and not one problem. Not bad for $400.

Link to comment
https://www.sau.com.au/forums/topic/42767-r33-into-the-12s/#findComment-873593
Share on other sites

Good to see another std turbo r33 into the 12's, still not sure where im gonna find a full 1sec but it'll be fun (and expensive) trying :rofl:

R33vit ran a 12.9sec on the std turbo with a "road tuned" P/Fc which is extremly impressive too.

Link to comment
https://www.sau.com.au/forums/topic/42767-r33-into-the-12s/#findComment-873716
Share on other sites

Running the Extreme Daikin Heavy duty.  Its been in for nearly a year now with about 20 runs down the strip and not one problem.  Not bad for $400.

No, not at all - I haven't had any problems with mine at all... but so far I have only been running around on stock boost, untuned SAFC and a catback exhaust - so no real stress for it YET :P I run 255s on the back so I am a bit worried that after the car is tuned with a bit more boost - it might get a bit more upset.

Anyway, keep up the good times guys! I'll watch with interest how you guys are going and see if I can get an R33 representing a little in NZ as well :rofl:

Link to comment
https://www.sau.com.au/forums/topic/42767-r33-into-the-12s/#findComment-873744
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...