Jump to content
SAU Community

Idicators Not Working [R34 Gtt]

Eps

By Eps,
in General Maintenance

 Share

Recommended Posts

Eps Enthusiast

Eps

Posted
Posted

R34 GTT 1998

My indicators have just stopped working as I got to work today. Hazzard lights dont work either. However my alarm works just fine and unlocking/locking the car with the alarm lights them up.

Depressing the hazzard lights button I hear the relay click once under the steering wheel.

When the alarm ticks the indicators, it seems that it is slightly faster than usual... not a broken indicator though - Maybe it bypasses the relay? - i dont know...

I can't find the fuse for the indicators, but the fact the alarm runs them fine makes me think this is not an issue, unless the alarm bypasses the fuse and relay.

Any tips?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/427685-idicators-not-working-r34-gtt/
Share on other sites
Eps Enthusiast

Eps

Posted
  • Author
Posted

I just removed the NILES IF332 OEM flasher relay and when I opened it it had burn spots on the plastic. It looks like a piece of metal broke off and shorted...

I placed a Tridon EP35 in to replace but it made no difference yet.

The relay still works though. I will check fuses as that seems likely.

Eps Enthusiast

Eps

Posted
  • Author
Posted

Fuses are all good. Funnily enough, I armed the alarm, hit the hazzard button and the indicators came on and went off and now cease to function when the alarm is armed... but all fuses are still okay... wtf???!! Someone somewhere said something about an indicator controller... where/what is it?

darksky34 Mentor

darksky34

Posted
Posted

hey mate sorry to sidetrack you but do you mind telling me where to get to the flasher relays? pic of the location would be great if possible.

I want to put in some LEDs for my rear indicators and i know that without a relay they will flash really fast - so i bought a relay switch thingy which will increase resistance, it's a plug type thing so no soldering necessary. any help would be much appreciated, sounds like you know where things go!

Eps Enthusiast

Eps

Posted
  • Author
Posted

Pop your head up under the drivers footwell and you shouldn't see a whole lot... grab a light and look for a black relay on the door side of the steering column. To help you can flick on your indicators and you will hear and feel it clicking. Unplug it to confirm that its the correct one. :-)

Eps Enthusiast

Eps

Posted
  • Author
Posted

Thanks mad. I did replace the head unit a few months ago. Could be likely.

I figured it could be a loose connection but the fact it still controls the relay made me look past it. Ill check on the weekend :-).

Has anyone got a wiring diagram inclusive of indicators? Ive seen a few but not one that details indicators.

  • 3 weeks later...
Eps Enthusiast

Eps

Posted
  • Author
Posted

Today I had another detailed look under the dash. I found a small fuse box going to the alarm with 2 fuses. a 5 amp fuse was blown. Replaced it with another 5 amp. It blew when alarm lit the indicators for 1/2 a second. Put in a 10 amp fuse now and the indicators work with the alarm!

The indicators still do not work with the stalk or hazard switch. I pulled out the hazard switch and connected it without the air vents. It makes a singular tick on the relay when depressed so it seems it still works. Still no indicators.

I removed the black box mounted in front of the flasher relay and check inside. All seemed okay. Just a smaller black box. No burns or smells.

What is in the brown relay thing?

I'm starting to think maybe the alarm is causing the issue...

:domokun::domokun::domokun::domokun:

Eps Enthusiast

Eps

Posted
  • Author
Posted

Tested the new replacement relay. It does not work.

Tested old relay. working but low voltage. Cleaned connectors and bent copper to make better contact.

Working.

TLDR; Relay was partially faulty, so was new relay.

I can drive my car again! After putting back together the entire dash hahaha! I'm just happy I know what it is now.

  • 2 years later...
xanavinismo Rising Star

xanavinismo

Posted
Posted

I have pretty much exactly the same problem with my R34 GTR! Indicators and hazards do not work (no lights, no sound from flasher unit) but DOES work when I arm/dissarm my alarm system... hazard light is fully plugged in, fuse for indicators & hazard lights are fine.

I recently cut off some wires that go to the standard Japanese Sat Nav (as it is was unplugged) but after looking at it closer I noticed that the the hazard lights has 8 wires:

  • 3 to main wiring loom
  • 3 to a Sat Nav connector
  • 2 to the head deck wiring

So im wondering why would there would be connections from hazards to sat nav/head deck??

Cheers for any info/help guys!

Eps Enthusiast

Eps

Posted
  • Author
Posted (edited)

I have pretty much exactly the same problem with my R34 GTR! Indicators and hazards do not work (no lights, no sound from flasher unit) but DOES work when I arm/dissarm my alarm system... hazard light is fully plugged in, fuse for indicators & hazard lights are fine.

I recently cut off some wires that go to the standard Japanese Sat Nav (as it is was unplugged) but after looking at it closer I noticed that the the hazard lights has 8 wires:

  • 3 to main wiring loom
  • 3 to a Sat Nav connector
  • 2 to the head deck wiring

So im wondering why would there would be connections from hazards to sat nav/head deck??

Cheers for any info/help guys!

This was in my GTT. I haven't checked out the wires going into the MFD (if that's what you're referring to) on my GTR.

Who knows. But if you cut it and then it doesn't work.......

This ^ If it stopped working exactly as you did this, check the pin out diagrams.

MFD Info: http://www.sau.com.au/forums/index.php?app=core&module=attach&section=attach&attach_id=166053 (from here: )

My alarm basically bypassed the standard relay and fuses for indicators. So that can mislead you.

Maybe check related fuses and then get a relay tester or another relay to test with.

Edited by Eps
xanavinismo Rising Star

xanavinismo

Posted
Posted

But this is what trips me out...

  1. My Sat Nav & Head Unit were both already unplugged (so essentially the wires and pins arent touching or connected to anything right??)
  2. Why would there be wires going from Hazard lights to Sat Nav & Head Unit connections? Shouldnt they just go straight to the wiring loom?

Oh and Eps - No wires are MFD related.

Cheers,

Eps Enthusiast

Eps

Posted
  • Author
Posted

But this is what trips me out...

  1. My Sat Nav & Head Unit were both already unplugged (so essentially the wires and pins arent touching or connected to anything right??)
  2. Why would there be wires going from Hazard lights to Sat Nav & Head Unit connections? Shouldnt they just go straight to the wiring loom?

Oh and Eps - No wires are MFD related.

Cheers,

Ah gotcha. Sorry, don't know anything about the Sat Nav units you describe. Didn't know they existed!

Check fuses in case one blew when you cut the wires. You might need to multimeter the wires you cut if it is still an elusive problem. I can't seem to find much on the wiring for the sat nav.

Check for voltage at relay and fuses and work your way back.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      INTRODUCTION

      By PranK · Posted

      Hi Apex and welcome! 
    • Sydneykid
      Alcon TA6 Calipers on R33 GTST - Flexing

      By Sydneykid · Posted

      Probably too late to reply to this, but worth a try. It's not calliper flex, the calliper as a whole is moving so it has to be calliper mounting bracket flex.  Calliper mounting brackets are designed to stop the calliper rotating, they don't need to be designed heavy duty to stop the calliper moving in and out.  Whatever it is is not the major cause of poor pedal feel, the outer pistons are moving towards the disc rotor the same amount as the inner pistons are moving away from the disc rotor.  Hence no change in fluid usage, what extra fluid is needed to move the outer pistons is recovered from the inner pistons. For a calliper to move as a whole by far the most common reason is the rotor is not perfectly centred in the calliper.  The first thing I check is that hub face is perfectly clean, bare metal, where the rotor hats contacts it.  Then I check the that rotor is firmly held in place by at least 3 wheel nuts (or equivalent). If all of the above are confirmed to be in perfect alignment then I would check the piston sizes and ensure that the 3 inner pistons and 3 outer pistons have matching diameters (eg; 28/32/36mm).  I have seen a no name 4 spot calliper that had 1 of the 4 pistons a different diameter. Maybe I missed it, are both the callipers exhibiting the same problem? I would remove the transfer pipe and inspect it to make sure that there are no restrictions. Maybe you already have but if not I would return them with the video and have them confirm all of the above.   Hope that helps Cheers Gary    
    • Sydneykid
      Replica built of first Gibson R32 chassis

      By Sydneykid · Posted

      If you have the original log book and it didn't have a chassis number quoted, then no money required.  I have "rechassied" a number of race cars, no problem as long as you have the original log book.   Cheers Gary
    • robbo_rb180
      Rob's S Chassis track cars. Now with more s15 and less 180sx

      By robbo_rb180 · Posted

      Yeah was planned, cheers.
    • Yeetus
      Question about BoV on RB25DET NEO

      By Yeetus · Posted

      Well the good news is that it won't run any worse with an atmo bov than it does with no bov, I've owned a few Nissans over the years (r32, s15 and now r33), the stalling issue caused by a bov or no bov while still having an afm is easy enough to live with, most people get used to driving them and just feathering the throttle when you come to a stop to avoid it stalling. Changing to a proper ecu with a map sensor is ideal but in the short term I'd just slap in the bov if you really want the whoosh sound. I looked into the pass through type maf like the R35 one above but decided against it as the amount of oil and crap flowing through the hot side would mean you'd have to clean it often to keep it working.
×
×
  • Create New...