Jump to content
SAU Community

Recommended Posts

Morning Everyone [/size]

I was just wondering if any one can guide me on this issue I am having with my awd system on my r32 gts4. [/size]


When I bought the car the awd system never worked and last night I thought I start playing doctor and see what is causing this system not to work. [/size]

So Symptoms [/size]

1. When you turn the key on no AWD or Hicas lights come on, [/size]
2. Checked 10A fuse under Dash, Fuse is good ( Continuity ) but once u plug it in there is no power or Continuity. [/size]
3. Ecu no red light on & no wires cut [/size]
4. Fuse under hood ( anti-skid 30am) no continuity or power when key is turned on [/size]
5. Relay in the truck next to the latch has power but no continuity [/size]
6. I bypassed the Relay, pump comes on but if you hold it there for a while it makes a nasty noise... [/size]sad.gif
7. There is fluid in Tank located in the truck [/size]


I found a Attesa ECU wiring Diagram and will be working on it tonight, with searching I found that pin 42 sometimes need to be grounded. [/size]

http://www.skylinesaustralia.com/for...ems-need-help/

This video Helped a lot. [/size]

[/size]

I need to Test the power wire to ECU and trace the wire from fuse box under dash to its power and ground, but if any one has had this issue it be great help save me some time and money. [/size]

Cheers [/size]


Rob[/size]
Link to comment
https://www.sau.com.au/forums/topic/428368-attesa-e-ts-issue/
Share on other sites

What do you mean by "has power but no continuity"? Does that mean that there's power on one side of the fuse but not the other? Does that mean that there's power on both sides of the fuse but the wire that goes out to the circuit appears to be broken?

If I inherited a problem like this, I would tend towards the assumption that something mechanical in the AWD system died and the owner took the simple bodgy approach of disconnecting the electrics to it rather than fix it.

1. When you turn the key on no AWD or Hicas lights come on

Have you checked the globes? The lights should come on when the key is turned to "ON" (before "START") - its a check that the globes are working. Otherwise, if the lights come on while the engine is running, it means there is an error in the HICAS &/or ATTESA.

What do you mean by "has power but no continuity"? Does that mean that there's power on one side of the fuse but not the other? Does that mean that there's power on both sides of the fuse but the wire that goes out to the circuit appears to be broken? If I inherited a problem like this, I would tend towards the assumption that something mechanical in the AWD system died and the owner took the simple bodgy approach of disconnecting the electrics to it rather than fix it.

The fuse box under the hood does only have power on one side and no continuity, i did find a plug that is unplugged that connects to the fuse box under the hood, but there is nothing to plug it in to... its attached to wire that goes in the strut tower.

yes i aggree that something was wrong with the awd system and he disconnected it electronically, because there is no power going to the ECU but there is power to the relay in the truck

Have you checked the globes? The lights should come on when the key is turned to "ON" (before "START") - its a check that the globes are working. Otherwise, if the lights come on while the engine is running, it means there is an error in the HICAS &/or ATTESA.

no there is no lights that come on the dash, only ebrake and seat belt i think are the only ones,

I was looking for the Ignition wire to Fuse box to see if that has been cut because the circuit is not complete when the ignition is on. I just dont understand how there is power to the relay in the truck. I got a wiring diagram but doesnt help much i need to find it in the car

I was looking for the Ignition wire to Fuse box to see if that has been cut because the circuit is not complete when the ignition is on. I just dont understand how there is power to the relay in the truck. I got a wiring diagram but doesnt help much i need to find it in the car

Don't you mean "trunk"?

Don't you mean "trunk"?

Yes... My bad

In the boot. Just left of the boot lid catch, there are two relays. The bigger one on the left is the 4WD relay.

ya the big one if i bypass the red and yellow wires i hear the pump come on but there is no power to ecu. I did find a plug unplugged that is connected to the ABS wire... doesnt seem like there is anything that connects to it because there is nothing in the area.

Also

I do not have ABS.

can anyone show me what dash lights are suppose to come on in a gts-4 Please

Can't seem to post a pic, but lights as follows:

left side:

Anti-Lock HICAS

Handbrake Battery

and right side:

Oil

4WD

I believe you must have ABS, because ATTESA uses the ABS wheel sensors to detect slip.

Can't seem to post a pic, but lights as follows:

left side:

Anti-Lock HICAS

Handbrake Battery

and right side:

Oil

4WD

I believe you must have ABS, because ATTESA uses the ABS wheel sensors to detect slip.

So I am stumped right now I have taken the driver kick panel off and its nothing but wires for the compustar car alarm. Its like a rats nest.

Is there any way that you can cut power to awd and abs.

The 4wd fuse is good both under hood and under dash.

I don't want to touch those wires cuz I am not suee whey they go.

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...