Jump to content
SAU Community

Recommended Posts

i was wondering if anyone has put 6.5 component speakers in the doors and in the rear of a r34 gt-t and if so what did you use for the rear speakers they dont seem to fit. from the looks of it i need a riser plate to install. i am using phoenix gold XENON 6.5 components

Edited by taz2069

If you haven't already purchased the speakers, I wouldnt worry about the rear set.

Leave the factory units in there. Run them off the headunit, dial the balance to the front speakers. (eg, Front 8, Rear 2)

Instead of spending your money on 4 speakers, spend twice as much on the front splits and run them off an amp. Your front stage is going to give you the bulk of your listening pleasure, you're better off focusing your money buying the best pair of splits your budget allows. The rear is only for fill, or backseat passengers - and if you've got a coupe, then chances are they won't be all that comfortable anyway!

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...