Jump to content
SAU Community

Recommended Posts

I wouldn't cut a hydro into the rear brake line, it feels like absolute crap, and then you can't foot brake and hand brake at the same time.
You have an internal drum handbrake which is very good, I'd work around that instead of cutting a hydro in.

  • 2 weeks later...
  • 4 weeks later...

who foot brakes and handbrakes at the same time?? wank factor?? how, if your serious about drifting go for hydraulic everyone uses them because there is nomaintenance required you'll never loose that feel

Don't listen to street drifters..

who foot brakes and handbrakes at the same time?? wank factor?? how, if your serious about drifting go for hydraulic everyone uses them because there is nomaintenance required you'll never loose that feel

Don't listen to street drifters..

so your suggesting use hydro handbrake because everyone uses them?? And no such thing ad no maintenance.

street drifters.? Huh.

so your suggesting use hydro handbrake because everyone uses them?? And no such thing ad no maintenance.

street drifters.? Huh.

As in there is a reason why everyone uses them. What maintenance can you think of besides changing brake pads?

Also don't brake pads last longer than drumpads??

who foot brakes and handbrakes at the same time?? wank factor?? how, if your serious about drifting go for hydraulic everyone uses them because there is nomaintenance required you'll never loose that feel

Don't listen to street drifters..

Assume your heading in to a corner at over 100kph using the most common entry technique (handbrake). You notice your going way to fast but want to maintain your angle and the control of the slide. What do you do? Use the front brake while still having the handbrake engaged. Rather than I guess purposely trying spin out to avoid slamming your car in to the wall?

I use a hydraulic handbrake and still engage the front brake mid slide, if needed.

If your handbrake works, don't change it. Install a drift button. If its on its way out look at getting a brake upgrade perhaps. I run big VS commodore brakes engaged by a hydraulic handbrake in a R31 skyline. Works a treat.

^^ Handbrake isn't an entry technique!!!
That's such an 'Aussie' drifting technique - it's crap. Handbrake is a tool to use midcorner to extend your line, a tool, not a technique for initiating a drift.

Do some research about real drifting before unloading bad advice on a good forum.

^^ Handbrake isn't an entry technique!!!

That's such an 'Aussie' drifting technique - it's crap. Handbrake is a tool to use midcorner to extend your line, a tool, not a technique for initiating a drift.

Do some research about real drifting before unloading bad advice on a good forum.

Oh ok. I guess keiichi tsuchiya is wrong and you are right. I mean he is the founder and one of the best drifters in the world but of course he must be mistaken. I'll let him know for you.

Yes, it is possible to initiate using the hand brake, but it is not at all the best technique for entry.

If you follow drifting in Japan at all, or any of the current good drifters you will see handbrake entries are hardly used

The best people do not use handbrake entries. Look at Suenaga, Nishida, Streeter. They all have amazing, unique style and do not use a handbrake to initiate a drift.
This is a very recent video from Nikko, look at the technique and you will see they do not use handbrake for initiating

The amazing video of Streeter drifting Meihan

High speed on Nishi course at Ebisu

Suenaga in a near-stock 180sx

Handbrake entries are outdated, 'Aussie' and low-skill.

Oh ok. I think I understand stand now. Before you said "handbrake isn't an entry technique!!!" And now your saying it is a technique but not the best one to use? And then continue on to reference all these very experienced drifters, some even professional drivers and their amazing techniques. Which is all fine and well, however we aren't pro drifters like you. And for novice to amateur drivers like me (which, lets be honest, is a lot of us) we use basic techniques, of which the handbrake entry is the most common. You are right, it may not be the best, and I do agree with you. But it's the easiest and the most common.

It may not be relevant to the argument, however this thread is about handbrakes. Therefore a handbrake entry comment was bound to come up. Wasn't trying to start an argument. Just stating my opinion.

My mistake, I should have said handbrake is a crappy entry technique, and certainly not the most common technique.

I know you're taking a stab at me by calling me a 'pro drifter' - just to be clear I am an absolute novice, only learning.
However, I do know that relying on a handbrake for entries is a bad idea, especially when you are learning. If you learn to use a handbrake for entries you will not develop good driving skill, you will become lazy and end up coming into a corner, braking, handbrake and power out - not really drifting.

You are better off learning to control the car with your foot brake, weight transfer and throttle. I drifted for 2 years in my R31 without a handbrake at all, including my first ever drift day (which as anyone who drifts knows, is an interesting learning experience).

It is more important to learn about weight transfer and being able to brake, steer and apply the throttle correctly, handbrake is a lazy thing to use and doesn't develop your skill.

Likewise, this is an open forum and we are entitled to our opinions (although, we have gone off topic). I'm not trying to argue, I'm just interested to chat about drifting :-)

Yeah, I think we both have valid points. At the end of the day it's a personal preference on how each technique benefits your drifting based on a combination of your skills and your car. I couldn't agree more about the importance of weight transfer and how you should learn all aspects of it, rather than just relying on one technique.

In regards to the type of handbrake I use, it's a JJR hydraulic system.

http://justjap.com/store/product.php?productid=19721&cat=331&page=1

Although if you are on a budget, the ebay ones are a lot more affordable. In comparison to mine, there isnt much different in terms of reliablity and appearance. I know numerous people running the ebay ones for over 2 years now.

If a hydraulic system isn't what your after then try a drift button. Also, a much cheaper option

For an r32 skyline gtst, is the ksport one any good? Thanks! Please reply cant find good information on it.

You will be fine with stock. If you do struggle, check cable adjustment and brake shoes.

Hey dude,

Just get any hydraulic hand brake and tee it into the rear callipers.

There all the same ae! i use a D2 one, doesn't have to be a big brand

I use a 3/4 master cylinder, gives better lever feel!

In line hydro handbrake is terrible. It should a separate system or valving should be used.

Standard with decent shoes at most change lever/handle, hydro is a bit of wank looks "racey" but really not needed.

Agree with this guy

who foot brakes and handbrakes at the same time?? wank factor?? how, if your serious about drifting go for hydraulic everyone uses them because there is nomaintenance required you'll never loose that feel

Don't listen to street drifters..

I do. It's not wank factor. Most people that use them rely way to much on them which can lead into bad technique.

If your serious about drifting, start standard and when your skill improves, then increase the performance of the car. A standard R32 handbrake is fine, if it doesn't work you've got problems you need to fix.

I would hope Handbrake isn't the most common entry technique.

Ok plenty of talk about handbrake entries as a technique, It is not. Its a great way for a beginner/firstimer to get a car sideways and learn to catch the slide and generally familiarize themselves with getting sideways and not spinning out. Its like training wheels on a bike. Mid corner (pre apex) or closing up on the lead car is about the only place its really needed. And the standard properly working line and shoes is fine save the money for some new bushes ir something

Don't know what planet someone of you guys are on.

1st you can't learn to drift of youtube, tsuchiya is a legend no disrepect but everyone is different

2nd I disagree hydrau feels like shit i've been using it for 3 years!

If need be depending on your car you could get aftermarket rear hubs which allow you to run a dual caliper setup/totally independent setups if your fussed about "that feel".

btw i wouldn't use a the foot brake and hydrau handbrake at the same time to tighten my line, that's just weird.. i use foot brake to slow down when in a slide

To the OP. As peeps have said above, if your stock handbrake is adjusted well and working good leave it at that for now.

Too many people get caught up in the "i need XYZ to be able to drift" thing.

I have drifted cars with hydro hand brakes and never liked the feel. Which Im sure can be changed by using different master cyl and such, but again, If your starting out, stock will be fine.

  • Like 1

A healthy handbrake line and good handbrake shoes (PMU or Speedtek) is all thats needed. i use speedtek shoes and they have not even thought about failing me. And when doing decent sized entrys the footbrake is needed to wash off speed and keep your angle. Id like to see somebody come hot into an entry and just use the handbrake to hold angle and wash off speed.

Edited by LTHLRB
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
×
×
  • Create New...