Jump to content
SAU Community

Recommended Posts

Back to the story.

After finishing up at nats and having a mad time things went back to normal.

Just the usual things started with the car.

Removed my turbo timer and came across this mess.

Not sure who the hell did this home job but it all got removed and fixed.

lDHYqLh.jpg?1

After a few spirited runs through the cotter I noticed that my intake gasket was shot.

So I ordered a new one online and did some research on how to change it.

At the same time I decided to get rid of the hicas and chuck a lock bar in it.

The intake gasket is a farking bitch to change! cut the fark out of my knuckles, lost a spanner (still haven't found it lol)

If you ever have to change one then make sure you have ratchet spanners because they are awesome!

4pHq5jS.jpg?1

Well it only took me a week to do :P but Yeh, it's very tidy and works much better than it used too. Hopefully yours does too! Good job on pulling out the turbo timer too, I'm glad to be rid of mine. Should have listened to everyone that told me when I put it in, but I was all excited about having a turbo car :laugh:

Haha that's exactly what I was looking forward to when I purchased the car. Felt like a sick karnt walking away from the car while it idled for a while.

The novelty wore off within a few months and I couldn't turn the damn thing off otherwise the car wouldn't start. Home job wiring

Yehhh, mine stopped working. Wouldn't keep the engine running, but kept the electrics on for 30 seconds. Means my oil pressure gauge would scream at me when I shut the engine down at the pressure dropped below 20psi :laugh: So far no sign of my old starting issues either, so I'm hoping they were related to the turbo timer.

ANYWAY, got round to doing the throttle sealant yet?

It's been one day dude haha

Throttle body sealant will be done this weekend I hope.

I'm going to use some glue that I have here and make sure it's a really fine film so that it breaks when I open the throttle.

I will report back how this goes.

The proper sealant can be purchased but its $80 for a small tin

Fark that

Make sure that glue is oil resistant, you don't want blow-by breaking down the glue and having it fly into your motor :/ Personally I'd fork out for the correct stuff, $80 is cheaper than causing other problems...

Communal goo? - sounds like soggy SAO game !

but Robs onto something. I think there would be a number of locals who might need/use

or perhaps a shop like Trojan might part with enough to help you out.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
×
×
  • Create New...