Jump to content
SAU Community

Recommended Posts

AFM will be good for over 350rwkw.

Injectors - depends on pressure. If you up the base to say 45psi then you'll squeeze more out of them easily enough... Also depends it seems on the tuner, E85 and fuel use seems to vary pretty heavily.

Too easy thanks boys, atleast I don't have to worry about that now as I'm aiming for 350ish anything more is a bonus.

Can anyone recommend a tuner that won't insist ill need 1000cc injectors in Victoria?

Too easy thanks boys, atleast I don't have to worry about that now as I'm aiming for 350ish anything more is a bonus.

Can anyone recommend a tuner that won't insist ill need 1000cc injectors in Victoria?

What turbo setup etc?

Most tuners are happy to use what you have and will tune it to a safe limit...

Too easy thanks boys, atleast I don't have to worry about that now as I'm aiming for 350ish anything more is a bonus.

Can anyone recommend a tuner that won't insist ill need 1000cc injectors in Victoria?

Take a drive to Racepace in Bayswater.

Plazmaman plenum, gtx3076 .82 externally gated 6boosy highmount and power fc. Similiar setup to your's 34GeeTeeTee.

Sweet! Maybe give Racepace a call as Ash said... I have spoken to them a few times when getting a radiator and they were super helpful...

The turbo will go over 350kw but depends how hard you want to lean on it ;) Keep me updated with results if you can, very keen to see!

Take a drive to Racepace in Bayswater.

Thanks ill check them out

Sweet! Maybe give Racepace a call as Ash said... I have spoken to them a few times when getting a radiator and they were super helpful...

The turbo will go over 350kw but depends how hard you want to lean on it ;) Keep me updated with results if you can, very keen to see!

Sweet ill keep you posted!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
    • If there's oil in with the clutch, I hope it finds its way out even if that hole has a cover/grommet 😛 I don't want oil near my cars clutch! 😛 Interested to hear the answer about covering it, I'm assuming a bung for a gearbox from another car that has a grommet to suit.
×
×
  • Create New...