Jump to content
SAU Community

Recommended Posts

AFM will be good for over 350rwkw.

Injectors - depends on pressure. If you up the base to say 45psi then you'll squeeze more out of them easily enough... Also depends it seems on the tuner, E85 and fuel use seems to vary pretty heavily.

Too easy thanks boys, atleast I don't have to worry about that now as I'm aiming for 350ish anything more is a bonus.

Can anyone recommend a tuner that won't insist ill need 1000cc injectors in Victoria?

Too easy thanks boys, atleast I don't have to worry about that now as I'm aiming for 350ish anything more is a bonus.

Can anyone recommend a tuner that won't insist ill need 1000cc injectors in Victoria?

What turbo setup etc?

Most tuners are happy to use what you have and will tune it to a safe limit...

Too easy thanks boys, atleast I don't have to worry about that now as I'm aiming for 350ish anything more is a bonus.

Can anyone recommend a tuner that won't insist ill need 1000cc injectors in Victoria?

Take a drive to Racepace in Bayswater.

Plazmaman plenum, gtx3076 .82 externally gated 6boosy highmount and power fc. Similiar setup to your's 34GeeTeeTee.

Sweet! Maybe give Racepace a call as Ash said... I have spoken to them a few times when getting a radiator and they were super helpful...

The turbo will go over 350kw but depends how hard you want to lean on it ;) Keep me updated with results if you can, very keen to see!

Take a drive to Racepace in Bayswater.

Thanks ill check them out

Sweet! Maybe give Racepace a call as Ash said... I have spoken to them a few times when getting a radiator and they were super helpful...

The turbo will go over 350kw but depends how hard you want to lean on it ;) Keep me updated with results if you can, very keen to see!

Sweet ill keep you posted!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...